pinhead_54 0 Posted March 19, 2010 Can you guys round the corners? If so, is there an addtional fee for rounding the corners. Share this post Link to post Share on other sites
Guest manwayvan Posted March 19, 2010 Hey ya I round the corners on my mags..It keeps them from coming off due to wind..No charge diff from me with rounded vs square. Share this post Link to post Share on other sites
hockeygirl 30 Posted March 19, 2010 I use a cheap $4 corner rounder from Walmart craft dept (tip from BannerJohn). Works great on magnetic sheets! And no extra charge. Share this post Link to post Share on other sites
bamafan2277 50 Posted March 19, 2010 You can pick up a little scrapbooking tool at walmart to round the corners. I don't sell a whole lot of mags so when I get a order I order the blanks from signwarehouse for about $6 for 2 12"x24" that has the corners rounded already. Share this post Link to post Share on other sites
Guest kenya Posted March 20, 2010 I would always use an xacto knife & a shot glass , then I bought one of the rounders that Bannerjohn mentioned in a post long ago. I don't charge for it either, it needs to be done & it only takes about 2 minutes to do a set. Share this post Link to post Share on other sites
Truckntran 0 Posted March 20, 2010 A quarter or a nickel will work if you don't have any shot glasses handy.. Share this post Link to post Share on other sites
kyjeeper 1 Posted March 20, 2010 The 12x24 magnets at SW come with rounded corners. Share this post Link to post Share on other sites