nenemott 0 Posted March 9, 2010 I got some messages on how I did the contour cuts with my uscutter lp24, and I decided to make this video on the subject. I did not have a microphone, so it is silent. If you have any questions just ask them here and I will respond. I used the Inkjet White Waterproof Vinylfor inkjet printers, from Papilio, here is their web address http://papilio.com/inkjet%20waterproof%20adhesive%20film%20media.html Just make sure to feed the printed paper top first until you have the laser right on top of the right registration mark and make sure it is straight so once the laser light goes to the left, it hits the registration there also. Good Luck <object width="480" height="385"><param name="movie" value="http://www.youtube.com/watch?v=pELeN6CMzlE&hl=en_US&fs=1&"></param><param'>http://www.youtube.com/watch?v=pELeN6CMzlE&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/watch?v=pELeN6CMzlE&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object> Share this post Link to post Share on other sites
ainakeaboy 0 Posted March 9, 2010 Great vid . Too bad no sound instructions though one question ,Does it automatically print out those registration marks for you ? Share this post Link to post Share on other sites
nenemott 0 Posted March 9, 2010 When you click print, you will see the registration checkmarks, just pick the two on the bottom, and every time after that it will do it automatically, there is a part that is cut off in between the enlarging for print, once you get the right size to fit on paper, print it and it will print the images and the registration marks which you will then feed into your plotter, feed it so the registration marks are at the bottom of the paper and make sure the laser is exactly hitting the reg. mark. Play with it , it take a few tries. Share this post Link to post Share on other sites
ainakeaboy 0 Posted March 11, 2010 Hey got it going but one problem , cant seem to line up the second reg mark . When jog it to the left it jogs to much so i cant hit the middle precisely . Any ideas ? Share this post Link to post Share on other sites
nenemott 0 Posted March 12, 2010 are you using the keyboard arrows Share this post Link to post Share on other sites