BigDaddyChris 2 Posted October 6, 2009 so, after a LOT of help from folks here on the forum I got the offset dialed in for my 45 degree blades. a few trial and error cuts and it seemed like .025 in. was perfect, then I see the box the blades came in and it says right on there "knifepoint offset 0.25mm" which is .00984 inches. so, grrrr, I'll try that. but does anyone know the offset for 60 degree blades? I'm using flexi 7.6v2 with a MH721 thanks! Share this post Link to post Share on other sites
Guest sciondrgn Posted October 6, 2009 I used .15 on my 60's with my Pcut Share this post Link to post Share on other sites
mikerob2334 2 Posted October 6, 2009 Most blades are .25mm offset. what brand blade are you using? Share this post Link to post Share on other sites
SSW 0 Posted October 6, 2009 What is a blade offest??? Share this post Link to post Share on other sites
mikerob2334 2 Posted October 6, 2009 What is a blade offest??? Distance the tip of blade is offset from the center line on the blade Share this post Link to post Share on other sites
SSW 0 Posted October 6, 2009 and how would you calibrate your cutting to make sure its cut right? Sorry for the questions.. lol Share this post Link to post Share on other sites
mikerob2334 2 Posted October 6, 2009 depends on what you're using. sb has the blade offset setting in the cutter setup screen Share this post Link to post Share on other sites