Please help with Hot Fix Metallic having major issues

[Guest JogaShop]

I just bougt hot fix metallic but my plotter is not ctting it right im using blades that came with the plotters (creation Pcut) do i need to buy a 60 degree Blade or what?

also im supposed to take the film of it from the back before i cut it Right?

Where is the best place to get the 60 degree blade? cheapest?

[tc3jg 1]

Hey IM a  newbie at this but I dont think you expose the sticky side until you have cut out your design covered it with transfer tape and are ready to apply. It is to be cut with the backing still on.

[Guest sciondrgn]

I just bougt hot fix metallic but my plotter is not ctting it right im using blades that came with the plotters (creation Pcut) do i need to buy a 60 degree Blade or what?

also im supposed to take the film of it from the back before i cut it Right?

Where is the best place to get the 60 degree blade? cheapest?

60 degrees do work better for more intricate designs and such.. a 45 degree should work fine though unless it is extremely detailed..  Metallics will typically wear the blade out faster though.

uscutter.com sells 45 + 60 degree blades

And no you cut the design with the backing material first then weed