krdesigns 1 Posted July 15, 2009 I am hoping someone can help me out. I just received my new USCutter Laserpoint Vinyl Cutter w/ Contour Cutting which came with the Signblazer software. I have an image created in Illustrator that is full color. I need to print this from Signblazer onto heat transfer paper, then contour cut it with my vinyl cutter. Here is my dilemma: When I import the image into Signblazer is comes in as a black image. You can not see the details of the vector image. So I was reading on these forums to perhaps export it as a jpg, then import that into Signblazer and vectorize it. Well, the image came across perfectly, but I can't vectorize it unless it is a monochrome image. Urghhh! If anyone can help, I'd sure appreciate it. Thanks, Karen Share this post Link to post Share on other sites
wwpro 1 Posted July 15, 2009 Karen you might have better luck in the Signblazer sub-forum http://forum.uscutter.com/index.php/board,41.0.html Sorry I cannot help you on this particular issue Share this post Link to post Share on other sites
Renegade 2 Posted July 17, 2009 Pretty sure that more posts doesn't equally more answers. Getting posts in the correct forum would help you out more than likely as well. Share this post Link to post Share on other sites