desertdog10 0 Posted July 11, 2009 Have a customer asking for about 50 decals like this. Can't figure out what would be the best method... black background with cut out gold to show the black letters through? Anyone want to take a stab at vectoring this with the colors? Any help appreciated.. -Jeff Share this post Link to post Share on other sites
FBRsportmod68 109 Posted July 11, 2009 need an image to look at before any advice can be giving. Share this post Link to post Share on other sites
DaveS 0 Posted July 11, 2009 I would have them printed, unless the are lg. enough to cut. printing would look better. my .02 Dave Share this post Link to post Share on other sites
tlzimmerman 11 Posted July 11, 2009 Depending on size, but if it was 6" or larger I would cut them, blue back layer yellow/gold over top with the words showing through. Share this post Link to post Share on other sites
desertdog10 0 Posted July 11, 2009 That's what I thought. Don't know anything about printing, just cutting. He wants both 3" and 6" sizes so I'm probably not going to be able to do it. Anyone want to share how to get into the "printing" vinyl business? Thanks! Share this post Link to post Share on other sites
tlzimmerman 11 Posted July 11, 2009 By a really really expensive wide format solvent printer and laminator and have an expensive cutter that can contour cut them accurately. It only cost about 20-30 grand minimum to do it right! lol Unless you find used or converted equipment Share this post Link to post Share on other sites
ViciousVinyl 0 Posted July 17, 2009 Here's my shoddy attempt at it. This needs a lot of cleaning up but it's as good as I can get it with the limited time I have right now. I'll try to do a little more work on it when I have time later. Hope this helps! DSUVector.eps DSUVector.eps Share this post Link to post Share on other sites