MH721-settings question

[tattoo u 0]

New to this cutter...I do not know how (or what numbers to use) to set the speed and force..and what are th V+, V- F+, F- settings for?

I am making logos for my sons business for car windows.  They are small 5x5 logos that advertise his shop. .  I am using vinyl sheets for now until rolls come in.  I have never used a big cutter before.  I have a wishblade/craft robo for scrapbooking and have done some wall vinyl on it. The settings easy for them.

Sorry for the silly questions.  Patti

[tlzimmerman 11]

V is speed and f is force.....you can slow the speed down for more intricate cuts, I run mine about 20-24 for just about everything.

Force is more complicated and has to do alot with your blade depth, with my setup my force is usually from 100-120 ish depending on what I am cutting.  Start at the machine defaults and adjust from there, if you aren't cutting through increase force, if you are cutting far into the backing either retract blade, decrease force, or both.

Good luck, its really about trial and error you will find what works best.

[firemalt 10]

I typically ran my refine at 12 to 16 on speed, and 60 to 80 on force.