text lettering

[repodon 1]

i am tiring to type a text but every time i type the letter T  the top of the T THE TOP THAT GOES ACROSS IS VERY VERY SHORT

also

i am trying to size my letters there are several letters that are  4inches tall and 3.75 inches wide  and also other letters that are 3.50 inches tall x 1.25 inches wide  they are not coming out right what am i doing wrong how can i fix this problem

i am using signblazer fonts

i am wanting it to say E.W SOLUTIONS 4INX3.75

                              FOR ALL YOUR COMPUTER NEEEDS 3.75INCHES TALL X 2 INCHES WIDE

                                MILITARY AND STUDENTS DISCOUNTS 3.50 IN TALL X 1.25 WIDE

                              WWW. EW SOLUTIONS 2 INCHES TALL X 2.75 INCHES WIDE

              THEN THERE PHONE NUMBER

I KNOW I AM GOING TO HAVE TO DO ONE LINE AT A TIME OR EVEN ONE WORD AT A TIME BUT THE LETTERS ARE NOT COMING OUT RIGHT ESPECIALLY THE LETTER ( T ) THE TOP PART THAT CROSSES OVER

WHAT AM I DOING WRONG  ABOUT TO SAY HAMMER TIME TO THIS DAMN PCUTTER 24 INCHE

THANKS IN ADVANCE

DONALD

[CKR 0]

Adjust the height in the box on the bottom if you are using sign blazer.

Make all your lettering 2 inch or 4 inch, what ever you want it to be.

If you are trying to make each line of your text the same length its not going to look to good.

You may have changed the compression.

[CKR 0]

Open this in sign blazer

letters.SBD

letters.SBD

[repodon 1]

what numbers do i need to have in compression on signblazer

[repodon 1]

ooooppppppssssss      sorry i meant to say thanks sorry bout that

[CKR 0]

I don't think you need to change it.

1.9238 is what I posted was set at.

It changes automatically with the letter size.

[repodon 1]

1.9238 is the compression

[repodon 1]

also i need the letters some are 2 inches tall by 4 inches wide and some 4 inches tall by 2 inches wide 

i done some text before but its been awhile and also i think i hit a button by accident and messed every thing up

<<<<<<  a screw up

[repodon 1]

I GOT A  QUESTION 

WOULD IT HELP OR MATTER IF I NEW THE SIZE OF THE BACK WINDOW OF THE VEHICLE IT IS GOING ON OR DOES IT NOT MATTER

I KNOW THE LETTERS THEY HAVE ON THE VEHILCE NOW IS WHAT I DESCRIBED ABOVE

4 INCHES TALL  E . W . SOLUTIONS THE LETTERS ARE  3.75 WIDE

THE WORD ( FOR ) AND THE REST OF THE LETTERS  ARE 3.75 TALL X 2 INCHES WIDE

DO I NEED TO FIRST GET THE SIZE OF THE WINDOW OR DOESNT MATTER 

[repodon 1]

do i need to measure the complete window yes no what

[chefgary 4]

I normally measure the area I plan on using and then set up the workspace in SB.  This usually works for me.

Gary