leefree 0 Posted April 15, 2009 Today I did some lettering and I noticed that on the vinyl graphics that I cut there are lines through the graphics. The lines aren't cut deep enough though so thats a good thing. The lines on the graphics match those to the ones displayed on the computer when you are in cut mode in Sign Blazer. The plotter is connected to the computer via serial port. I'm just wondering if any of you guys have had something similar? Share this post Link to post Share on other sites
sarconastic 29 Posted April 15, 2009 Vinyl tenting up and the blade dragging across when it moves or your blade is out too far to be able to raise enough to clear the vinyl. (1/2 a credit card rule on the blade depth. Kevin Share this post Link to post Share on other sites
leefree 0 Posted April 15, 2009 Ah ok. I don't know why I didn't think of that. Thanks for the tip. Share this post Link to post Share on other sites