Nutec 0 Posted March 21, 2009 Just received my new Laserpoint 48" cutter and set it up, no biggie there, but find it strange there isn't any instructions in the way of pictures showing the correct installation of the blade, or how the vinyl roll is placed on the rods. Can you help? What I mean is, there are 2 rods 1 with guides and the other with nothing on it. So I put the vinyl roll on the guided rod , but do I thread the vinyl around the other rod. The knife holder on the cutter seems very tight, extremely tight, I loosen the thumb screw all the way and it takes a lot of force to install the blade holder. Is this normal? Just want to make sure I'm doing this correctly. Paid not a real lot of money for the equipment, but times are slowly getting tougher and I want to make some money with this thing and not break it or put undo stress on it. Anything would be appreciated... Bill Share this post Link to post Share on other sites
KE5AFU 0 Posted March 21, 2009 Not sure about the blade, but i believe that the vinyl sits on top of both the rollers. Share this post Link to post Share on other sites
Nutec 0 Posted March 21, 2009 Now I really feel ----id, You're right, it does sit on top. 1 down, 1 to go... Thanks for the quick response Bill Share this post Link to post Share on other sites
firemalt 10 Posted March 21, 2009 http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=41 page 12 of the pdf file http://forum.uscutter.com/index.php/topic,8859.0.html Share this post Link to post Share on other sites
ms_sign 5 Posted March 21, 2009 Welcome from Fort Worth, Texas Jon Share this post Link to post Share on other sites
yoginaranjo 0 Posted March 24, 2009 Welcome From Southern California Share this post Link to post Share on other sites
99v8miata 3 Posted March 24, 2009 Welcome from Chicago. Dave Share this post Link to post Share on other sites