biggin69 2 Posted March 21, 2009 I am doing some lettering on an ice cream truck and have no clue how to price it. It is all one color. Should I charge by the square inch or? Thanks in advance for any advice given. Dan Share this post Link to post Share on other sites
2GuysSign 4 Posted March 21, 2009 Charge by square inch, your labor for installing, make sure to mark up materials and installation goodies because those are not FREE! Share this post Link to post Share on other sites
biggin69 2 Posted March 21, 2009 Ok. It is a total of 6000 square inches. What is a good price per square inch? Share this post Link to post Share on other sites
firemalt 10 Posted March 21, 2009 Wow... that's a lot of sq. inches. @ $0.10 that comes out to $600. If you have that much signage to to cut/install, I would suggest going by the sq foot.(divid the 6000 sq in. by 144(sq. in. in 1 sq. ft.) and charging roughly $5 per sq ft.(their cost for the material), and then charge accordingly for installation(average of $45.00 per hour). Good luck on the job. Share this post Link to post Share on other sites
