troube with two color sign on window inside

[distilled 0]

I am doing my first job and am haveing trouble. The sign is white letter with a red backing about 24 high by 40 long.

I am using the wet method. It is on the inside of a store front so it can be viewed  from the outside. I am first placing the letter. ( all good so far) then I try to place the solid sheet for red over them. But the letters stick to the red and everything goes to shit.

Is this the best method or is there a better way to cut of apply?

Thanks,

Bill

[lowone 3]

Have you tried the hinged method? I usually do layers before installing when possible. That way the image is one piece while you are installing it. Although I know 24x40 is a little large to layer, It CAN be done. Good Luck with it

[jayfil23 0]

make sure the letters are good and dry before doing the second layer. sometimes i do the first layer, go do another job, then come back and complete the second layer.

[Guest sciondrgn]

Ive done layers on customers cars using the wet method without any problem.. Just make sure the first layer you put down is good and dry before rewetting. 

I have done some using the hinge method as well