hani1400 0 Posted March 9, 2009 Hi I have a customer that wants me to remove existing vinyl from a light box sign and apply new vinyl lettering. What are the best tools and substances to use that won't leave any marks or scratches? Any tips and advice appreciated. Thanks Share this post Link to post Share on other sites
midwaste 4 Posted March 9, 2009 They sell "plastic razor blades", that is what I would recommend. And a heat gun to warm up the vinyl. Share this post Link to post Share on other sites
hani1400 0 Posted March 9, 2009 Thanks a lot for your quick reply. What about the adhesive removal stuff? Will rubbing alcohol be fine after using the heat gun and plastic razor? Or should i get a special kind? If yes, which do you recommend? Share this post Link to post Share on other sites
jfought 120 Posted March 9, 2009 grafix gone from uscutter or fellers will do it the best for removing anything that is left. Share this post Link to post Share on other sites
hani1400 0 Posted March 10, 2009 Can't find it at UScutters do u think i can get this at home depot? I'm kinda in a hurry and don't want to wait for shipping time. Share this post Link to post Share on other sites
tservice 3 Posted March 10, 2009 read this thread. http://forum.uscutter.com/index.php/topic,14680.0.html Share this post Link to post Share on other sites
2GuysSign 4 Posted March 10, 2009 I use a heat gun to take off the vinyl, then use 3M adhesive remover... You can get the 3M stuff at almost any auto body supplier! Make sure to clean the surface with Alcohol well before applying any new vinyl! Share this post Link to post Share on other sites