Peppermom3 0 Posted February 22, 2009 I have the pcut creation 24" with the signblazer trail stuff. Ok I finally got a part of a J to cut but it has a line through it. Also when my blade hits the left red button it will not do anything. HELP HELP HELP. How the heck do I work this crazy thing. I am crafty but this is kicking my but. I have had this thing for 4 weeks and have just today gotten part of a letter to cut. Someone email me off list or call me please. I need to cut stuff to pay for this machine but need mega help. Peppermint Share this post Link to post Share on other sites
wasatchcars 0 Posted February 22, 2009 I have the same cutter Position your vinyl in the middle of the cutter so it stays away from the red buttons Share this post Link to post Share on other sites
Peppermom3 0 Posted February 22, 2009 So I loaded inkscape. How do I get text Just type it in? Do I then save and resize in signblazer? HELP HELP hehehehhehe Share this post Link to post Share on other sites
acehole 1 Posted March 2, 2009 So I loaded inkscape. How do I get text Just type it in? Do I then save and resize in signblazer? HELP HELP hehehehhehe If you're just cutting text type & size in signblazer then cut it Share this post Link to post Share on other sites
Jay2703 704 Posted March 2, 2009 So I loaded inkscape. How do I get text Just type it in? Do I then save and resize in signblazer? HELP HELP hehehehhehe I use signblazer for almost everything except vectorizing. Especially text, if you are going to make text make it in your cutting software. Then it is editable. Share this post Link to post Share on other sites