tgo 0 Posted February 11, 2009 Got this great machine here but haven't figured it all out...learned how to get some text on the cutter screen, hit the cut icon and get "cannot open the output device. error initializing cutter" running XP and a serial cable. Thanks for the help ok changed to COMM3 and it recognizes something because a box pops up "sending to Cutter" but nothing happens. Share this post Link to post Share on other sites
Guest Posted February 12, 2009 If you are using the serial connection you are going to want to change it to Com1. Go into your device manager down to the Ports (Com and LPT) section and double click on com1. Go to the second tab and change your flow control to hardware, click OK. After you do this turn off the machine for a count of 10 and then boot it up. You should be cutting away after this. Share this post Link to post Share on other sites
w1dfu 0 Posted March 31, 2009 I'm having a problem initializing as well. Using SignBlazer and connectiong using parallel port. I have also cofigured the bios per the instruction. Share this post Link to post Share on other sites
