graphikta 0 Posted February 6, 2009 Hello, I just got a new CE5000-60. while i have it running well, i would like to run it like the people that glow about the machine. just looking for some fine tuning tips on how to get nice straight lines, tight corners, no overlap where the object closes... stuff like that. there is a lot to learn on the machine and i have only had it for one day, but good info on the machine is hard to come by. so if any of you can help, thanks in advance Share this post Link to post Share on other sites
ms_sign 5 Posted February 7, 2009 Please provide a little more info. OS, connection, Flexi? sample cut file....... Jon Share this post Link to post Share on other sites
graphikta 0 Posted February 8, 2009 windows vista 32bit, usb, illustrator with cutting master 2 plug in... not sure what you mean by sample cut file, but i can email you a file and my results if you give me your address thanks Share this post Link to post Share on other sites
ms_sign 5 Posted February 8, 2009 I use XP and Flexi, so I can't help you with Vista or the Cutting Master 2 plug in... These are my settings for Oracal 651. For Cast I adjust the force between 012 ~ 18. For heat press material I set the force to 020. My blade just marks the backing paper but does not cut it. Jon Share this post Link to post Share on other sites
DTFuqua 0 Posted February 8, 2009 I found mine didn't need any fine tuning. It just neede me to quit screwing it up. Share this post Link to post Share on other sites