Radioactiveman 2 Posted February 6, 2009 i just got my PCut and Can not figure out how to connect the plotter to the pc using the serial cord. Do I just plug it in and it should work or do i have to install something??? Please help asap I want to start playing!!! Share this post Link to post Share on other sites
firemalt 10 Posted February 6, 2009 the cutter should of come with a CD that has the driver for your computer. If not, I believe it can be downloaded from http://support.uscutter.com Share this post Link to post Share on other sites
vrpro 19 Posted February 9, 2009 I installed my software first then connected my PCut630 using the serial connector. When you start the SignBlazer software it will see the cutter. Share this post Link to post Share on other sites
Guest Posted February 11, 2009 You do not need drivers for the serial connection. Hook the cutter up to the computer with the serial connection and turn the machine on. Open SignBlazer Elements, click Cutter, click Setup, change the top drop down box to Creation PCut CTE630 HPGL, change the second drop down box to Blazer.Com1: Communications Port. You should be good to cut now. Share this post Link to post Share on other sites