The Outlaw 0 Posted November 13, 2008 a mini review.. I have had my Laser 24 up and running about a week now, no real issues just a little fumbling getting the blade depth set (was pretty easy actually) I have been in the sign indusrty many years but i could def. see where some newbies would have problems setting the machine up, so forth. So far it has worked great and tracked great. When i received the cutter one of the pinch rollers came pre-broken so i have my Creation that is also here (broken) i took 2 of the rollers off that and replaced on the new cutter. So basically, now i have three pinch rollers, it seems to work way better on the long runs i have done, so far i have cut 90" in length with NO off-tracking issues whatsoever. I am digging the media basket, very very useful! This machine is very much the same as my Creation was, so i was quite familiar with everything. The only thing i wish US Cutter would offer is a cover for the machine and roller casters for the bottom of the stand. Overall i am quite plepase with it so far and it has worked fine. Cant beat the cutter for the price! SIMPLY PUT! I am attaching a video i took with my digital camera, not the best but you get the idea. <object width="425" height="344"><param name="movie" value=" name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> (ignore my voice i have a bad cold right now ) <object width="425" height="344"><param name="movie" value=" name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> Share this post Link to post Share on other sites
The Outlaw 0 Posted November 13, 2008 by the way, i dont know why it posted each video twice, i tried to correct it to no avail..maybe one of the mods can fix it? Share this post Link to post Share on other sites
cutme 5 Posted November 18, 2008 i added a third pinch rollet to my machine also. i installed a lighter spring though to keep from marking up the vinyl. here is the thread describing the spring i used. http://forum.uscutter.com/index.php/topic,4773.0.html bb Share this post Link to post Share on other sites