Search the Community
Showing results for tags 'parts'.
Found 4 results
-
New cutter (Vevor KI-720) startup problems, broken parts and fixes.
Li'l Popeye posted a topic in Vinyl Cutters
Hello, A couple of months ago I purchased this new Vevor KI-720 cutter, which came with Signmaster software and USB cable. Out of the box and everything connected the feed rollers did not rotate, while the display was showing that they should. It wasn't able to feed vinyl. What I did was opening the cutter to find the motor that drives the feed rollers, to measure if there was any power getting to it. When I opened the bottomplate, I saw that the entire power supply was loose inside the cutter, while it should be bolted down to the bottomplate. This might have happened during shipping from China to me. Because the power supply was loose it must have bumped the connector to the feed roller motor, because that connector was loose and some pins of the motor were bent. Easy fix: straightened the pins, connected the connector, bolted the power supply down to the bottom plate and it functioned. I also had minor problems with getting the Signmaster software to recognize the plotter, as I was not able to select any plotter in a drop down menu. I contacted Future software, opened a ticket, and they helped fixing the issue within a day or 2. I had to download and install new Signmaster software and after that it worked and I was able to send designs to the cutter. ^Power supply loose inside of cutter. Also connector of feed rollers motor came off. ^New Vevor vinyl cutter. ^Sending design to vinyl cutter with signmaster software. ^Little bit of customization... 20210419_213954.mp4- 11 replies
-
- pen holder
- vevor
-
(and 3 more)
Tagged with:
-
Replacing both cutter strip and softer area for pen on MH1351
antsinthekitchen posted a topic in USCutter Refine Cutting Plotter Discussion
I work in a community maker space, and the Teflon Cutter Strip is frequently replaced on our MH1351, but I couldn't find any replacement for the softer area in front of the Cutter Strip anywhere on the US Cutter website, nor could I find a description in the manual. Is this a replaceable part, and if so, what is it called?- 1 reply
-
- replacement
- cutter strip
-
(and 2 more)
Tagged with:
-
Where do you find replacement parts for the Graphtec cutters? The cutting groove on our Graphtec CE-6000 is pretty cut up and we are looking for a replacement part. Has anyone ever replaced the cutting groove on the Graphtec CE6000? If so, where did you get the part? Thanks!
-
I have made progress since the other thread, and should have a sleeve machined by the end of the holiday that will adapt a sharpie to fit in the laserpoint I. The best I can tell, all the holders for the USC entry machines have slightly differant specs, but support didn't seem to know what they were. Can some of you provide some accurate measurements of the blade or pen holders for your machines? Or maybe someone who's been around longer can help me find them. What I need is the distance from the tip to the bottom of the shoulder that sits on the arm. I see the diameter of the plotting pen in my user manual, and will DL the others to check, but if you could provide that just to confirm it would be great. Another member has shown interst, and should be getting me dimensions for the laserpoint II. Much thanks in advance Pete