Graphtech Condition 2 skewing

[Graphtech Condition 2 skewing]

Hello

wanted to give an update about the "problem" i was having.

Looking on the condition settings i found the distance adjust  x: being 0.45% and y:0%

I changed x to 0% and it has fixed the skew problem 

gotta be careful when editing those settings 

thanks all for sharing 

[Graphtech Condition 2 skewing]

Gonna  do the change to GraphtechStudio for sure and try it out.

It arrived free like you said 

 

Thanks

[Graphtech Condition 2 skewing]

Hello 

 

This is an example of what happens

Top line is sending it with condition one and bottom line is the correct one that doesnt skew when i send it alone. btw it improved changing the force to 15 but the last line got messed up (see the pic)

 

 

 

 

Not sure if you can see thats the lenght i been using for condition 2....Blade looks fine 

[Graphtech Condition 2 skewing]

thats really good to know 

Im in a bit of rush but ill try and send blade pics tomorrow

 

Thanks!

[Graphtech Condition 2 skewing]

Hello 

I tried changing the wheel pressure to outsidewheels strong...inside wheels medium  and with no change on the skew problem.

This is the setting for condition 2, I normally have the cutforce on 32 but was testing it on 36 

[Graphtech Condition 2 skewing]

4 minutes ago, Dakotagrafx said:

cutmaster is a plug in - graphtec pro studio is just like full fledged flexisign pro except it doesn't have the RIP feature for our wide format solvent printers - so like comparing grub hub to a 5 star restaurant 

Gotcha 

[Graphtech Condition 2 skewing]

1 hour ago, MZ SKEETER said:

I was looking at the pinch roller adjustment in my user manual and it is best to have the 2 outside pinch rollers with more pressure than the inside pinch rollers. There is a page in the user manual for how your pinch rollers should be.  And I don't know if you knew it,  but you can get FREE  Graphtec ProStudio software from Graphtec for that vinyl cutter.  It is over $1000 software, like Flexisignpro..    I only use Flexi software with my Graphtecs.   Also, you don't state how you set your blade depth.  Hopefully blade depth is not dragging on your vinyl. 

https://www.graphtecamerica.com/cp-graphtec-pro-studio-request-form/

Thanks  Ill let know if any makes a difference.

Is Graphtech Prostudio better than CuttingMaster?

[Graphtech Condition 2 skewing]

Good day to all,

Machine: Graphtech plotter  FC8600-130  64"

Trying to find a solution when i send my projects normally 50"w by 60"h  registration marks made with Ai Plugin, I assign condition 1 and condition 2 in CuttingMaster3 normally and it cuts well except when condition 2 starts...sometimes the first line cuts good but going up it begins to skew upwards each line it changes more eventually damaging the first cut.

All wheels are in their respective position with medium pressure.

One solution ive found without problem is sending condition 1 separate from condition 2  so each one sseparately works perfect... but for speed i want to send both at the same time. What could be the problem...a fix besides sending separate cuts  Any input would be appreciated.

Thanks