mopar691

Here is me a few years ago out havin' a blast

I use the wheel of pokey things. Its looking pretty empty, they have a way of finding themselves in every room in the building where they don't belong.

WoW only for me, No console games here. Been playing since it was Orcs vs Humans. I play 3 nights a week for 3 hours at a sitting. All I do in competitive Arena.

Can you do a 2 pass with about a 2 sec drying time? That will really darken up your colors.

Ya its pretty much the same if your going on a white background. Sometimes have to double hit the colors if you want them dark enough on glass. If this image is going to be contour cut I take it in all the white space they want clear? As in the light yellow fading to a clear? If it is CC and they want white then no need for clear as it would have to be all flooded with white anyways. And being that small the little bat handles will not last very long CC at they will be really thin.

Something like pictured here with the rounded rectangle cut? Printed and laminated on clear?

We have to call in a locator here in MN for every hole we punch or stake we drive in the ground. Its free and they mark wire locations. If we fail to use this free service the fines start at about $750 and go up from there. Even though this looks simple you need to call in a locate for this. I have seen many end users punch right thru fiber lines with this cause they did not see any thing above ground that looked like wires were in the area. Just play it safe and get a locator out and mark for you.

Got sick of running them thru my laminator to apply to the dibond, I got a 50" Big Squeegee coming with the new handle tomorrow. Can not wait to try that out.

Ive got almost 2 dozen more of these to do again.

Ya I got a few here in the shop for that purpose also

Pretty much hogs all resources if the file is big enough. Pandora will stop and everything will crawl while it is ripping a file such as a wrap anything big if it is detailed and not just created within flexi.

Ripping a large file will peg all cores for a good 15 minutes

I really only see diff from 16 to 32 when I have huge or multiple PS files open. Ripping taxes my processor, really not ram. Otherwise it is kinda overkill but works flawlessly.

I SO REMEMBER THAT!!

I had a TI-99, think it is still in the basement somewhere

They also have by far the best squeegees on the market.

Here is what i use

They have 3105HT (Calendered)

Need something like Oracal 3951HT for high energy plastics.

Spam Deleted. Ya BannerJon!! MSI 970A-G46 Board with 32 gigs corsair vengeance ram installed. AMD FX 8350 8 core Clocked up to 5.0 ghz Older pair of GTS 250's in SLI. They run excellent but I hate buying new graphics cards every year so I have kept these 2 for a few years. 128 SSD drive holding Windows 7, Flexicloud, Adobe CS6 and of course World of Warcraft. Nothing gets saved to this drive except what I am currently working on. 4 other misc drives holding other programs, customer files and other garbage arranged by drive. OCZ 850 watt power supply. Cooler Master Hyper 212 cooler. Big ol XIGMATEK Case, lots of fans and filtered air for the case, holds 10 hdds three of which are hot swap-able via front door. 3 main monitors and on a articulating arm in front of desk is a 24" LG tv that mirrors my main monitor only so customers can see what I see without being behind me. The setup takes up most of my desk but runs like a dream. I just put this one together in march. And every march I upgrade this main one and move older parts to others within shop. I have always run ASUS main boards, tried MSI this year and really I dont like the Bios of it at all. Last one I will buy, Might not even make it to march till I go back to ASUS. Customer files backs up to Dropbox Pro

So is mine. Cant run a box stock unit.

Insurance pays for down time also and they will get you up and running within a day if your are covered in your policy correctly., Generally whole shop can be replaced within 48 max hours if need be. PC is easy, Printers and plotters are only a few hours away. Install rip, Estimate and CS6 and away you go. Everything is backed up offsite.

Most do unplug or shut down. Myself pay way to much for insurance and never get to use it so everything stays on. Everything is on backups though so I get a chance to power things down as I never shut anything off.

Generally situations such as this the part of the "sponsoring a hole" also includes this advertising and such that they are expecting. If you go about asking for releases when they already gave them their advertising dollars they might wonder whats the hold up.

Nope, it is great material. Just personal preference. Whole other story in a whole different area. You can, send me your files, I can print them and you can wrap anything!!!