-
Content Count
582 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Everything posted by MrMopar64
-
http://www.istockphoto.com/file_closeup.php?id=2309751&refnum=little_bobek http://vectorart.org/lotus-vector/ http://entertainment.webshots.com/photo/2995338450104805119XuTeXl http://vectorya.com/freevectors/embroidery-vectors/lotus-flower-vector/ http://www.clker.com/clipart-white-lotus-flower.html Here are a few.... hope you can use one MM64
-
Hi All I need some help on pricing. I've got several pricing formulas they all come out different but in the same ballpark The problem is I'm new at this and the prices look alittle high... So I thought I'd come to the experts before I bid the job. BTW... they have a price from someone else and I don't want to be to high or to low... Also I Don't have to do any artwork. Here is what they are looking for... 29 x 5.... 300pcs 18.5 x 4.. 300pcs 8 x 1.75.. 300pcs Each size will be cut in 3 different colors 100ea color for a total of 300pcs per size Thanks for any help!! MM64
-
What I came up with which I thought was kinda high Calualator lg one 300 for 3,222.58/10.74ea med one 300 for 1,689.06/5.62ea sm one 300 for 311.14/1.04ea PSI lg 300 for 4350.00/.10sq in med 300 for 2220.00/.10sq in sm 300 for 420.00/.10 sq in PSF lg 300 for 1800.00/6.00sq ft med 300 for 900.00/6.00sq ft sm 300 for 600.00/6.00sq ft I really want this job but don't want to under cut the industry... that will just bite me later if I make a go of this sign biz Thanks again MM64
-
Thanks for the info!!!! MM64
-
I don't use SB but if it has an outline tab that should do what you need MM64
-
In AI go to effects then to warp then to arc lower set the amount click OK Hope this helps MM64
-
Joshua What car shows do you do? I got a Kustom that I show around the area. MM64
-
Hello From California - I have a question too=)
MrMopar64 replied to Luvmydane's topic in Introductions
Hi Shelley I'm also in So. Cal. in Whittier Where are you buying your product? The only places I've found are Sign Mart in Orange county but they won't sell to me wholesale because I don't have a store front... So I have to go into LA to buy wholesale from Odrway. Please let me know if you know of someone else. Thanks MM64 -
MH-721 computer to cutter issue
MrMopar64 replied to muddywaterpirate's topic in USCutter Refine Cutting Plotter Discussion
I've had an issue like that but I use flexi 8. Most of the time I just close the program and reopen it and it cuts fine. Mine seems to do it if I open the cut window and cut something then go do something else and let it sit before I try to cut something else... Good Luck MM64 -
lol I didn't even have enough since to ask... I just pulled it off and have wondered up till now if I should have MM64
-
Little corners not cutting out so great, what to adjust ?
MrMopar64 replied to stewiegriffin's topic in General discussion
I had the same problem.... if you turn on overcut in advance tab in the cutter window the problem should go away... MM64