peteyf
Members-
Content Count
48 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by peteyf
-
I am new to all this with my Pcut 630. I called US Cutter yesterday, and asked for help doing a sample cut. He said to register with SignCutPro, it was free for 1 year with my cutter. I put in my bundle code and it came back with ...error, registration code is already registered :). Has anyone else had a problem with this? I sent 1 email to them, but never heard anything from them. I just sent another email to them at a different email address. Is there anything else I can do in the mean time to get on there? Thanks for your help Petey
-
I am new also. I had the same thing happen to me with SignCutPro. It said that I was NOT registered ???I have left two emails with them and no one has gotten back to me. What the deal ???I also have Corel Draw 4 and don't have a clue on how to use it. Why do they make things so difficult I have only been on this forum for about 3 weeks, but I have learned so much in the 3 weeks. Youtube has help also Good luck
-
SignBlazer...Is there any instructions on how to use this?
peteyf posted a topic in General discussion
I just got my Pcut 630, set it up, and now I am trying to do a simple design using SignBlazer. I am absolutely clueless on how to work both of these . Are there any instructions for SignBlazer on how to send your work from your computer to the cutter? I have all the cords in the right places, and tried to export it -
SignBlazer...Is there any instructions on how to use this?
peteyf replied to peteyf's topic in General discussion
Thanks for the help. This is what I was looking for ;D -
I should be getting my 24" Pcut either tomorrow or Tuesday. I am trying to get a list of things that I will need. I will be doing heat transfers mostly and some signs. Oracal 651 White and black siser easy weed 15X15 white teflon sheet cutting matt some squeegees weeding tool r-tape clear choice 12x50 transfer tape??not sure what this is foil glitter transfer mask???not sure what this is Can you think of anythin else?? Thanks for your help
-
Thanks for the good feedback. I do have a heat press...thank you.
-
Anyone know a wholesale place in Alpharetta GA to buy vinyl supplies
peteyf posted a topic in General discussion
I looking for a place in Alpharetta GA, where I can buy some supplies for my new vinyl cutter (squeegee, transfer tape). I am trying to avoid the shipping costs. Thanks for your help! Petey -
I want to do a two or three color design on some t-shirts. Can it be done and how? Thanks
-
Anyone know a wholesale place in Alpharetta GA to buy vinyl supplies
peteyf replied to peteyf's topic in General discussion
Thanks for your help -
I am getting the Pcut 24" and someone mentioned a vinyl that was inexpensive and good to practice on. I can't remember the name or brand Thanks for your help Petey
-
I just bought a new 24" PCut. I don't know anything about this machine or what I need to go with it. I am going to start with heat transfer first. I would like to buy a roll of cheap vinyl first to practice on. Can you tell me the name and where to get it? Do I need anything else I need or need to know? I am so excited . I am sure you will see me on here a lot more asking questions Thanks for your help! :)Petey
-
:)Thanks...I would have never thought about going on Utube to watch a video on how to do set it up. This forum is really wonderful. Thanks for all your help.
-
Great ideas. Thanks for the help. What about tape? I keep hearing about this tape. Is this something I will need? Like I said...I know NOTHING about this PCut cutter, and don't know what else I need to setup. Someone just said the cutter won't come with a manual...... HELP!!
-
Cheap Vinyl to practice on...what is the Name?
peteyf replied to peteyf's topic in General discussion
Great...thanks for the help and advice -
OH NO...... :oDon't tell me that. I love this forum...but I don't want to live on it! I guess I won't have much choice if it does not come with instructions. HELP!!!!
-
Hi, I am new to the Vinyl cutting world. I have been doing embroidery for the past 6 years and LOVE it. I have done some heat transfers in the past, and really like doing them, but it was getting expensive having another company do them and the shipping was very expensive. So I just ordered a PCut 24" and I should be getting it next week. Not sure how to work it or what to do with it once I get it. I hope it comes with GOOD instructions. If you have any good suggestions on do and don
-
Hi, I just ordered my Pcut 24" also. It will come next week. I am also very new. Can you give me any suggestions or help on anything to make my life a little easier when I get my cutter Thanks Petey
-
Is there much difference between the MH Series and the PCut?
peteyf posted a topic in General discussion
I am trying to find out is there much difference between the MH Series and the PCUT. I am new to the Vinyl cutter world and just want to make sure I get the best one for me. Right now I am doing t-shirt transfers, but may venture outside the box and do bigger things. Thanks for your help and advice :-[ -
I have a Happy machine 1 head/12 thread...and I am very happy with this machine. I
-
I see a few of the people out there are recommending the Pcut 24" for a first timer like me. What kind of heat transfer vinyl would you use for t-shirts? I also have CorelDRAW graphics Suite X3(don't know much about it)...will this work on the Pcut 24"? Thanks for all your help.
-
what software and vinyl do I use for t-shirts
peteyf replied to peteyf's topic in General discussion
I know from ordering from Transfer Express they have a few different vinyl's for the different kinds of t-shirts. Is the siser Easy Weed good for all kinds of shirts...cotton, poly, baseball jerseys? -
I am looking for a new vinyl cutter, but am just starting off. I don't want to spend a lot of money, but I want a good one that will last me for awhile, and what size should I get?
-
Hi, I am new to the vinyl cutter world. I have my own embroidery business, and do some spirit wear for a school, but want to grow my business bigger in the heat transfer world. I use Transfer Express right now, but it gets very expensive with the shipping. That is why I am thinking of getting a vinyl cutter so I can do my own lettering and transfers on t-shirts. I went to the ISS show here in ATL last weekend and saw a Roland cutter. I have Corel Draw(don't know much about it) and the sales person said I could use Corel Draw with the Roland cutter? Can Corel Draw be used on most cutters? I don't want to spend a lot on a cutter. Any help would be very appreciative. Thanks