-
Content Count
132 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Dbannon
-
I have a MH871 cutter, and recently when it cuts, the display goes completely blank. When it's finished cutting, I hit reset to get ready for the next color, and the welcome screen comes on and then goes to normal. It keeps the settings, so I don't know what's going on with it. I've had it for almost 2 years running hard, is it getting wore out?
-
Like this. And it took a while doing it.
-
I currently have a Roland PNC1100 cutter, and been trying to figure out VinylMaster Pro (works with the cutter). I've seen posts where ppl are cutting directly from Corel to a newer Roland. Will it cut to the older model? I'm looking at getting Corel x4 mainly for printing, but if it'll work with the cutter, that would be a huge bonus.
-
I'm not sure what others are using or how they have their cutters hooked up. My PNC1100 is so old that it has a floppy disc that is for windows 3. So I don't think there's any chance of that working. lol
-
And the decals are good for outdoors?
-
Thanks for the help. If I were to print my own decals, what would i print it on? I looked at the Sihl 3988 vinyl, but is it available in sheets for the printer?
-
I looked at the Epson 1100 and it offers High Temp, Pigment, or Dye. What is what?
-
I will be getting into heat pressing shirts and I see Broder has Dickie button up shirts for around $16. Is there a place to get like what Cintas carries for mechanics?
-
Does anyone have any Ed Hardy art vectorized? My daughter is wanting me to make some wall art for her and she's really into the Ed Hardy art. I'd appreciate it!
-
thank you so much, she'll love them!
-
Does anyone have a template of a mid 80's chevy truck? I'm working on a project, and really need it. Thanks.
-
Does anyone have a silloette of a possum? I'd really appreciate it.
-
I had someone threaten to sue for slander for a calvin sticker that's floating around town. All he's peeing on is "Big Mikes". He has a Big Mikes Deli and grocery. Can He sue me? I looked up on the internet and there's more than 5 million big mikes. And it's supply and demand, right?
-
those are like the ones i already have. Note the chain on the hydrant, it's not on the origional. When I tried to node edit to remove it, the whole hydrant disappears.
-
I've been struggling with this image. I've tried vectorizing it, and duplicating it, but have no success. If anyone could help, I'd be greatful.
-
I'm in need of a mid 80's F series truck template. I will be doing graphics on an 83 F350. I don't know if that'll make a difference. Thanks if you can help.
-
That'll work. Thanks
-
I just bought out an ld sign shop, and I ended up with rolls of Spar-Cal vinyl that look like marble. I have grey and burgandy. Also 2 rolls of vinyl, one is rainbow (yellow, orange, pink, purple, blue) and one (yellow, green, blue). The guy did the sign work back in the 90's. would this stuff still be available?
-
I have a MH871 and I was trying to cut full side graphics for a truck (128"). Once it cut the outer perameter, the blade went off to the left and began grinding on the side. What's going on? When I made it shorter, it ran fine. Is this a software problem? I also noticed the tracking sucks when doing anything long. It'll get off maybe a 1/2 inch running out, but when it goes back in, it's about 3 inches off. I tried adjusting the pinch rollers, and I also took a square to the material rack to make sure it's straight. How can this problem be fixed? I wish the stand was a little more heavy-duty. I'd appreciate any help with these problems.
-
I'm in the process of buying out a sign business, and he has an old roland pnc-1100. The driver for it is an actual floppy disc (windows 3) and the flexicut version he has is for a mac (which he no longer has). Is there updated software for this or is it just an old relic? I would appreciate any help or advise you can give. Thanks
-
Does anyone have or even if it's out there, a template for racing gocart body? I would appreciate it.
-
I was told that a friend was quoted $30,000 to wrap a 30' enclosed trailer. Does this quote sound right? I don't know what wraps run, especially that big. I've been looking for the opportunity to get the equipment to get into doing wraps. Would it be a smart ideal to offer the job for the cost of ALL the equipment, ink, vinyl? I wouldn't make much on that job, but I'd open a huge door by offering wraps and printed media. I'd appreciate any advice.
-
Ok, thanks for all the replies, I thought it was high, but I don't know the wrap business. You all are great help! Thanks so much!
-
Does anyone have a mountie school mascot? I had a request for a graduation open house sign. I'd appreciate it.
-
I've seen it before: A baseball bat being broken hitting a ball. If anyone has this and would like to share, I would greatly appreciate it. The only thing I could come up with is the ball biting into the bat.