sign blazer hangs part way through job in SignBlazer Posted April 17, 2009 I don't work for tech support, but I've been in IT for more than 30 years. It sounds like a couple of things could be happening: 1. since you installed a serial card and everything looks fine now - it could be you had an outdated driver 2. your signblazer priority is set too loo- since the cutter uses a serial port everything is sent as a 'batch' job to the SP that's why you can't cancle in the middle of a job (you can but the cutter ignores the request) 3. your hardware settings must match mine are set to: baud 9600, 8-1-n, hardware handshaking. 4 keep your running processes down! (Don't run 10-n chats) Good luck
sign blazer hangs part way through job
in SignBlazer
Posted
I don't work for tech support, but I've been in IT for more than 30 years. It sounds like a couple of things could be happening:
1. since you installed a serial card and everything looks fine now -
it could be you had an outdated driver
2. your signblazer priority is set too loo-
since the cutter uses a serial port everything is sent as a 'batch' job to the SP that's why you
can't cancle in the middle of a job (you can but the cutter ignores the request)
3. your hardware settings must match mine are set to: baud 9600, 8-1-n, hardware handshaking.
4 keep your running processes down! (Don't run 10-n chats)
Good luck