rock jeep
-
Content Count
90 -
Joined
-
Last visited
Posts posted by rock jeep
-
-
-
You can buy directly from the Vinyl Master Cut website as well. I called US Cutter, and they aren't exactly sold out; it's a new product they will be selling, but do not have in stock as of yet.
-
Thanks so much, dakotagrafx!
-
I can open it in Explorer, but not in my program It has to be an .eps file.... Thank you for trying!
-
-
Thanks!
-
Well, nothing has worked. I'm trying to cut a mustang emblem. I have not cut a mustang this big before, but I have cut several mustangs in the past that were a little smaller. However, I did try to cut a different emblem that was half the size I'm trying to cut the mustang, and it didn't work either. But I have actually cut this particular emblem at this same size before, so that is weird.
If we get a new cutter, what would anyone reccommend? We don't do these every day, so we don't need anything big and fancy.... Like I said above, we currently use a Refine MH871 cutter and signblazer software.
-
Thanks, I'll try that too!
-
Sorry I didn't list the cutter, software, etc. Was in a hurry to go get my children when I posted. I have a Refine MH871. I use Signblazer software. The item I am cutting is 36"w x 18"t. Again, I have cut items this size before with no problem, in this same workspace, so, yes, my workspace should be long enough. I use windows 7 professional. It does appear that where we had it grounded came loose, which I didn't think to check yesterday for being in such a hurry, so I am going to try that right now. If that doesn't work, then all the items in the link will not have been the problem and I'll just have to figure something out. Thanks for the info.
-
I have been doing vinyl decals for over 3 years and I have run into another problem, just a few weeks now since the last one. This time, (which has never happened to me before), I am trying to cut a large item, and it cuts and cuts and cuts, then abruptly stops just a little before it gets finished. I tried cutting a smaller version and it cuts just fine. But, like I said, I've cut large items before, without this problem. Anyone have any idea what's going on? Any help will be greatly appreciated. Thank you.
-
Thanks for the help! My husband checked all of that and it started working, but he doesn't remember what he did to make it right....LOL I think it was the force, though.
-
Hello All. I've been cutting decals for about 3 years. I was cutting some decals this morning, and all was fine. Then out of the blue, my needle starts cutting completely through the vinyl. I haven't done anything different. The needle wasn't loose and it's fairly new, just changed it about 3 weeks ago. I've only done a few small decals since I changed it, so I doubt it's dull. I've never had this happen before. Anyone have any idea why it would just start doing this?
-
.eps
in SignBlazer
Hello! I have used the GIMP program to convert a .jpg file to an .eps file, however, when I save it to Signblazer and try to cust it, it still says it's a bitmap image which means I would need to vectorize it. Needless to say, vectorizing causes it to look choppy and when I do it that way and try a node edit, I still can't seem to get the lines curved just right. What do I do? Thanks so much!
-
Okay. Thanks.
-
I think it needs to be a vector, but simply vectoring the image wasn't working. It came out all choppy looking....
-
Is it possible to change a .jpg file to a .eps file?
-
I really appreciate all the help and all the info! Thanks so much!
-
Okay! Thanks!
-
In order to get a jpeg to an EPS, you will need a vector program.
Adobe Illustrator
Adobe Photoshop
CorelDraw
Inkscape - Free
Someone else will also suggest some things, I might be wrong on this as well. You could post the JPEG you need converted in the help section and someone might help you. or there are a few individuals that do a stellar job if you sent it to them, typically for a fee.
Post the image and I will see what I can do as well!
Thanks. I had already tried to vectorize, but it made it look kinda "choppy". We are going to donate these to the pageant, if we can get it to work right. All we need is the Logo part on the right, not the words on the left. Thanks again for any and all help.
-
Can anyone tell me how to change a .jpg file to an .eps file? Is it possible? I use the SignBlazer program. Thanks!
-
I take that back, rodh2....it was the correct one. LOL Thanks again!!!
-
Hey everyone, sorry I haven't been back on. I didn't have access for a few days. Yes it is the DU head with a bow. It does look pretty much like the one that Rodh2 shows. It was only slightly different. I guess it was just something someone added on their own. I appreciate all the help. I'll try this and see if this is okay for my customer. I don't see why it wouldn't be. You've all been very helpful! Thanks!
-
Love this stuff! Got a couple! Thanks to all!
-
I have tried the search box for this and have looked all over the internet. I found a link where I could get one, but it won't work. Does anyone know what I'm trying to find? Does anyone have it? It just the regular, I guess most common, duckhead. But, it has this little bow on top that looks sort of like just 2 little triangles. A customer showed me a pic of it and asked me for it a month ago and I still can't find it! Please Help! Thanks!
Half heart, half wing
in Graphic Requests
Posted
I'll try it. Thank you so much!