Rip_frannie

So I have a fj-600. I took the main station apart to clean the dampeners and the heads. I put it back together and tried to do a test print. Now no matter what. All I get is a temp too low message. I've tried unplugging it for a day or so. I also tried having the main power on and secondary off for a few hours. Anyone else have this problem or know how to fix it ?

Are you able to refill these cartridges ?

Figured it outlet Dakota. Cable was upside down. Blue side goes down

Do you know if on the head. The blue part of the ribbon is up or down ? I have it up

Yeah I planned on the head. But it was fine before. So I don't know

Yeah I inpluged it completely. I put the cable in like 3 times. Same message.

I used the swabs with the cleaning solution. Moved it to the side and just dabbed around it. Yeah I had the main power off

Was wondering where I can find out how to set the profiles for the fj600. There are all pre set ones on the program. Believe it's color choice. I had a test print with a random pic. But there was no black in it. I tried changing them. But now it won't print at all. The heads don't look low enough. Here's a pic.

Was wondering why my plotter sometimes cuts perfect and on others it seems to drag the blade and the vinyl gets caught on the blade and it looks terrible.

Found it out boys. I had too many layers in the vector art photos. I just went to cut, then cut by color and de-selected the layers that were not the main ones and now all my pictures cut perfect.

I'm using sure cuts alot. Was looking for something in the menu already. Didnt see anything

Ok I'll oil the blade. Some clipart it traces the same area a few times. Any way to stop that? What is the cut strip?

Was wondering why my plotter sometimes cuts perfect and on others it seems to drag the blade and the vinyl gets caught on the blade and it looks terrible.

Was wondering if my head on the left side is dried up cause the lack of black. Here's a test print.

There playing possum on me Dakota. Have a graduation party to go to. Gotta mess with it more this week. Going to get a new parallel cable too.

It only did that on that test photo. On the larger one it didnt. How can I find the software a that are compatibable with my printer ?

Ok thanks alot. I have the disks for the the color choice. Might try to figure that out haha

Damn just for the software ?

Ok I'll try it tomorrow. Thanks alot Dakota.

Ok I will tomorrow. What software do u suggest ?

I found a update for color rip 2, only had the fj-540 on it though. Went through it and found all the profiles. But no luck with printing.

Thanks alot Dakota. Where are the profiles located?

I have no clue. I just saved a random pic off google. It his was on the white vinyl too. The larger pic I did didnt have them in it at all. How do I adjust the coloring? Yeah I plan on using it for indoor posters and eventually dirtbike graphics when I work out all the kinks.

Ok cool thanks. Check it out. Here's the first pic. What do u think?

Dakota I got it printing. Did a test print and for vinyl it didnt look bad. Can I put a canvas like paper through it for a test ?