Blue27

my letters look like this on in this post , but no answer was givin.

I cleaned and oiled the blade again. I am running a 45 blade 40 speed 110 pressure. Notice the corners of the H are cut at an angle and the straight tops are not straight. Thanks for all the help File attached cut test.sbd cut test.sbd

I have tried the blade setting instructons earlier but did not seem to help and I do see it with other fonts. Speed is at 40 preasure 110. I had a 60 blade in and it was a lot worse, I switched to a 45 and it became much better. Thats why I am leanig toward something is not right with the blade holder or an alignment issue. It should cut better with a 60, right?