Knobhill
-
Content Count
427 -
Joined
-
Last visited
Never
Posts posted by Knobhill
-
-
Not a single issue with my Pcut 630 24" Very happy with it.
-
I've never had any luck finding anything there that was usable. I should be more specific; 2000 Polaris 500 RMK rear tunnel graphic. It may have been used other years as well.
It Took about 10 minutes to design this;
Removed
-
What is the vote for? Please clarify.
-
It's simple, the vinyl is how thick? Set your blade out a little more than the vinyl thickness.
-
I actually saw a single roller cutter on ebay. Don't remember the brand. Anyone know the one I'm referring to?
Using a single roller is old school. Stick the inserts into the roll, slide the bar through and drop it into the brackets. Don't miss it accept for the fact it was tractor fed and no drifting possible of the vinyl and an articulating blade.
-
I read where PCUT has "continuous rollers" in order to cut narrow vinyl....as small as 2 1/2". If that is the case, they would 'always' be going over the cut area. I also read where someone added rollers and don't understand that (because of the "continuous roller" in the description).
Would someone please clear this up for me?
Thanks,
Regis
I believe that refers to the metal drive rollers not the rubber pinch rollers you engage and disengage.
-
If your not doing a lot of work only turn it on when you need it. It's not a good idea to leave it on overnight. I usually setup my jobs and cut them all at once then shut the cutter off. No need to waste energy these days.
-
Anyone have this? or at leased a pic? Need to use it for the basic idea for a friends sled. His initials just happen to be RMK. Thanx in advance.
-
You can try cleaning your machine and defragmenting the hard drive. Beyond that I won't venture after getting slammed on this site and being correct.
-
My advise is to stay away from credit cards and Paypal. Your employer can pay you through normal payroll as a subcontractor.(labor only) 1099 at the end of the year. No business name necessary. That simple.
-
Unfortunately this was an item sale with an auction twist. Not good. As said, go to ebay if you want to auction your items. Prices were posted and offer to buy was made. Sold. End of story. The redundant posts should be deleted and not allowed. Keep on subject. Feedback or comments from parties not connected to the sale should be not allowed and deleted also from this thread. my2cts
-
You got it.
-
-
Glad it worked.
-
-
So far i haven't seen any so called Vista compatible programs actually work 100%. You just have to deal with it.
-
Yup
-
I'm currently watching Wanted and it looks like it's going to be the new worst on my list.
-
Among the newest movies I found Hancock to be the one that was the worst. Box office says otherwise. Opinions vary. LOL
-
Air bubbles, water bubbles and the rest of the issues are eliminated through experience. How do you get to Carnegie hall? Practice man practice.
-
Glad to help
-
LOL nothing is for free and never was.
-
I recommend installing the serial card and not using a converter.
-
It won't Cut.....
in General discussion
Posted
Glad to hear you got it straightened out. Vista seems to still be a little finicky with drivers. An far as cleaning the truck, you need somethig that will remove wax and silicone. I use Prep-Sol which is normally used before painting a vehicle. It's safe for most painted surfaces. Other cleaners work just as well.
http://www.performancecoatings.dupont.com/dpc/en/us/html/prodinfo/chromasystem/H-19295_3919S.pdf