RickS
-
Content Count
189 -
Joined
-
Last visited
-
Days Won
1
Posts posted by RickS
-
-
are the faces cut out to show substrate color? or is it white over the red? Looks good
-
the back of their heads is lost in the back ground, you might have to add some detail to finish the silhouette better if you are trying to use without a back ground color.
- 1
-
I would guess if you just cut this and weed the grey parts you will get the results you are looking for.
- 1
-
what do you need done with this?
- 1
-
Laser, find someone to do the job for you.
-
copyrite?
-
move the cutter out of the way so we can see the Bobcats.
- 3
-
Remember there is a big difference between wants and needs. do you really need it? do you only have one cutter? If you are buying a new cutter you should look at having a back-up cutter.
- 1
-
do a search on here, the file has been posted
-
I don't think $2000 will get you very far with a printer, let alone a cutter that is decent enough to do what you are looking to do.
-
Sig P230 compact, love this thing.
also have an XDm in 45 can't go wrong with anything springfield armory, good pistols.
-
MB you are awsome, that was quick. Thanks so much, hope I can return the favor some time. saved me a ton of time after I went through about 1200 fonts. Thanks again.
-
-
Find someone with a laser cutter.
-
I use nexus font also, works for everything I do.
- 1
-
Thanks, I will give that a try when I get home tonite.
Well a little update, worked just like you described, thanks for the flexi lesson. I had never used that function, now to remember it for next time. so much to learn.
-
How can I get rounded corners on a square in flexi, I have tried the outline feature and it doesn't get what I want.
I just need to put a slight radius on the corners. It probably is stupid easy but I must be stupid, help.
-
Be careful of serving food, most places require a food handlers card and health department inspections. just more BS to deal with.
- 1
-
In Flexi I would select the whole project, then Arrange, then Group, then select Effects, then Outline, select the width of the outline and that should work for you. -
The connector on the board should have a tab that will open the connector so the cable can be inserted and then snap shut to hold it.
-
I like Nexus Font, works for what I use it for.
-
I have done this before with no problems, I just put the tape right up next to each other but don't overlap, get it as close as you can, even a 1/16th of an inch gap is fine.
-
Jaybird is correct, I have the QE60+ and it is a relabled Graphtec without the contour cut feature. I have had ZERO problems with it and the flexi master plus software.
-
Joe, here are the files that I have used in the past. the local gun store gives these out with their logo with gun purchases.
I couldn't find a garand file, these are cut ready, also try the silhouette websites. all-silhouettes,.com, Da-Font's, ect.
- 1
In search of software for graphtec plotter .
in General discussion
Posted
Probably be easier to find an old XP computer to use just for cutting and design.