-
Content Count
1,332 -
Joined
-
Last visited
-
Days Won
25
Content Type
Profiles
Forums
Gallery
Everything posted by AshComputers
-
Bubbles after applying graphics and decals
AshComputers replied to rawtgraphics's topic in General discussion
I use a straight pin and go in at an angle. Works great when I'm applying heat to it -
What is going on with this company?
AshComputers replied to kcr357's topic in Criticism and Complaints about USCutter
My hard drive just flew out the front of the cutter!!!!! Oh shoot! Nevermind, that was just the vinyl oooooooops ahhahahahhahhah -
What is going on with this company?
AshComputers replied to kcr357's topic in Criticism and Complaints about USCutter
Actually, I was thinking about revamping the mobo on the thing, you know those new quad cores would increase production time by 1000%! I'm just skeered that the quad will burn that hard drive up in the cutter, wait, I need to find it first, maybe you can give me a point in the right direction? heeheheh Wonder how fast the hard drive is? 100rpm? heehheheheheeh Maybe I can overclock it and get 200 rpm's ? hummmmmm weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee heheheheheeheheh -
What is going on with this company?
AshComputers replied to kcr357's topic in Criticism and Complaints about USCutter
Actually I had thought about setting up a raid array, thus rigging it to a blade server so I can make my LP faster than ever wwwwwwwwhahahahahaahah This is to fun! -
+ 1
-
What is going on with this company?
AshComputers replied to kcr357's topic in Criticism and Complaints about USCutter
Yup, I'd buy that for a dollar..... wwwwwwwwwwwhahahaahahahahahah Man, I had to go get a shower, I almost had to go to the hospital when he said hard drive hahahahahahahahahahaahah Man, that was a great laugh, if you come back, thanks for the humor, I needed it, been a hot miserable week and that laugh just blew allot of the frustration right out the door...... Hard Drive wwwwwwwehehehehehehe I believe you just whipped John Carrie with that hard drive joke, got anymore? I loved it! heheheheheheh -
What is going on with this company?
AshComputers replied to kcr357's topic in Criticism and Complaints about USCutter
Yeah, does that one come with an upgraded hard drive? Or did it get SQUISHED in dat box? ahhaahahahahahahaha -
What is going on with this company?
AshComputers replied to kcr357's topic in Criticism and Complaints about USCutter
wwwwwwwwwwhhahaahahahahah what a PI he is, wwwwwwhahahaahahahahahahaahah I'm dying over here wwwwwhahahahaahahah Best laugh i've had in awhile, HARD DRIVE wwwwwwwwwwweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee -
What is going on with this company?
AshComputers replied to kcr357's topic in Criticism and Complaints about USCutter
I sort of like the "Flame" comment, when he got on here saying he wasn't buying anything because of this and that, and he doesn't have a clue what he's talking about HEHEHEEHEHHEHEH He see's the bad posts, because the good ones don't post how good USC is, only the one's that have a problem get on here and complain............ And some that haven't bought a thing and still "think" they know what they are talking about........... Hilarious people kill me, at least I got a good laugh out of the guy before he ran off to pay allot more for the same machine! I gave him a Positive vote as well ! Keep up the fine investigation work, poooooor dude, gotta feel pain for him OUCH! THERE WENT A PAIN SHOOTING ACROSS MY BUTT heheheheheeh -
What is going on with this company?
AshComputers replied to kcr357's topic in Criticism and Complaints about USCutter
Hard drives burning out? What hard drive? hahaahahahahahahah To funny -
What is going on with this company?
AshComputers replied to kcr357's topic in Criticism and Complaints about USCutter
+ 1 -
Hey Joey, I don't know if these are copyrighted or not, but you can see them here http://www.mapkernow.com/nfl-helmets-an.htm Hope this helps
-
Rtape works well with 651 I like it
-
Zombie, try the Roland PNC 1000 driver, let me know how it works for ya.
-
WOW! HEY STU!!! Long time no see you hehehehehe
-
Neons and florescent fade fast, shoot they even fade indoors but not as fast as outside. Your best bet is to go with bright colors and leave these alone if this is going on a customer's job. I've heard of some laminating it, still the same outcome, UV makes it fade really fast. Hope this helps
-
What is going on with this company?
AshComputers replied to kcr357's topic in Criticism and Complaints about USCutter
I have a Laser point 24".... thing cuts like no one's business. I cut and cut and oh yeah, cut some more. I think alto of issues that arise around here is "User" error........ some do not have a clue what they are doing in the first place. Trust me, you just don't buy one of these machines and say LOOK! I'm a pro! ehehheheheeheh If it weren't for my bud's on here I would have been in trouble right off the get go. I don't go under a fews opinion, I go by everyone's opinion. Go pay more somewhere else, thats your decision that's for sure. We also have a couple people on here that say they like USC but then go around and bad mouth them, those along with the complainers that come on here, I try to ignore like a plague. I do business with them all the time and NEVER have steered me wrong once. Maybe something will go wrong sooner or later, but hey, who's perfect? Something goes wrong almost daily in one of my shops with one thing or another. But who's perfect? Raise your hand if you are.... I don't think so heheheehhe My favorite line is.... "I called and had to wait 20 minutes and noone answered the phone til then, oh man, then they put me on hold and I had to wait 2 more minutes, oh goodness whaaaa I had to wait a total of 30 minutes before someone actually talked to me. P.S. HAVE YOU CALLED WALLY WORLD LATELY? wwwwwwwwwhahahaahahahaha P.S.S. Have you ever called any business and they said oh HEY GRAND MASTER here I am, let me kiss your feet!!!!! heehehehheeheheh MAN! I quack myself up, we will stand in line at a ball game for how long? gezzzzzzzz Have you EVER considered for once, that someone actually is "working" like crazy behind that ringing phone? Oh, wait, or did you consider that they might have been talking to YOU on the phone is why they didn't answer in 5 seconds? I can see it now.... PLEASE HOLD, I have to answer the phone that's ringing, you'll just have to wait til I get finished with this other guy................ Can anyone say Spoiled Brats? I CAN! weeeeeeeeeeeeeeeee hehhhheheehe My 1 Cent -
Contour Cutting Tutorial: SignCutProd Pro and the LP24
AshComputers replied to NukleoN's topic in Signcut
Your links need to be fixed NUK... dead as a hammer, take the "http://" out of the hyperlink. -
To be fair, 651 does hold up in my situation. 751 is on the high side, but you could go up in your price for the material and pass that on to your customer I guess....... Roxy loves 751 I believe, maybe she'll chime in on this situation. Neither IMO is bad advise whatsoever
-
Has anybody used this website for pricing reference?
AshComputers replied to sfandm's topic in Instructional Contributions
Somebody made it for me, aint it cool??? heehheheehh -
Has anybody used this website for pricing reference?
AshComputers replied to sfandm's topic in Instructional Contributions
The site stinks, I can't get the php to load on the updating and designing page. Whom ever owns that site needs to fix it IMO -
+ 1
-
Hello Snap, I just ordered and received the tree green/Lime, it's the closest I could get to a neon green. Real nice looking color also. I read somewhere that the neon fades quickly in outdoor applications. Hope this helps
-
cutting fine then suddenly decides to draw a line straight through the middle of work
AshComputers replied to spudlyc's topic in General Help
Your exactly right Deth, not every problem is a memory or keyspan problem. But most issues are memory related, I have customers gallore call me and bring their machines to me to look at, they all say the same thing, "This thing's to slow!!" It won't run Corel, its loading and loading and loading my graphics. Same ole same ole, after a memory upgrade.... walla, fix issue. But some are stuck in the cache if you will, they never clean them out, they never defrag their machines, and most important, they never update to the "fixed" versions of their software. Aggrevates me to no end heheheheeheh But anyhow, changing the file size has to do with the cache as well, anything you open on your machine is also opened in memory as well. Just like IE cache caches every web page you go to, it's to access it faster at a later time when pulled up if you will. As far as Keyspans are concerned, I've seen these things communicate over and over. Most of the lower end units have a communication problem at some point or another with a straight usb to usb connection, also with a usb to serial communication. This is why I recommend getting one, I'm not going to be in the middle of cutting and have my machine loosing communication with my computer. Anyhoo, I can set here and go on and on lol I'm whipped, it's been 24 hours, time for some shut eye.