Archer

Members
 View Profile  See their activity

  • Content Count

    16

  • Joined

  • Last visited

Posts posted by Archer

  3. Posted

    WoooooHooooooo I got the VinylMaster pro to work I need to do some test cuts but it appeared to go threw the motions of my last lettering job correctly without a knife in it.

     

      I started loading different drivers into it and the USCUTTER SC - 25 in seems to work.

     

      So as it stands right now both SB and VM are working.

     I can't thank everyone enough for all the help.

    I am going to load some vinyl and give it back its knife and see if it behaves

  5. Posted

    Slice.

       Whether it gets me up and running or not I greatly appreciate all the help from everyone.

    Also something new, not only am i getting the device not recognized with the yellow triangle  I an getting another usb listing It says USB Serial converter and that it's working properly

    The one not recognized is on Port_#0004.Hub_#0003

    and the one working is on Port_#0002.Hub_#0003  

      but still no luck on bringing the cutter to life.

      I am going to un install VM and re-install but before I do I will shut down the USB security thing and see if that makes a difference

  11. Posted

    Well no luck so far I deleted VM and re loaded it I tried the chip set link above  and nothing.  I tried SB on the tower machine and nothing. so now im trying to load VM on the laptop that works with signeblazer to see if that works.

     I think it is a problem with my tower machine more than a problem with the cutter. Its going to be some setting that is hiding some where

  14. Posted

    Hello Slice

     

     Yep it's been a while, Computer crash and life and all that. But now I'm trying to get back into the cutting thing.

     

      My old laptop is running SignBlazer UNcracked and the cutter works fine running XP, my home tower is running Windows 8.1 with VinylMaster pro is the one that's gunking up the works.

     In device manager under USB the port with the cutter has the yellow triangle if I hit the update driver button it says that the driver is up to date.

     I have lots of other USB devices that I plug in and out of this computer and they all work.

     

     And also my MH721 is an older MK1 not a MK2 if that makes a difference 

  15. Posted

    This is driving me crazy.

     I am able to run SignBlazer on an old laptop and it cuts just fine but when I try to run it on my home computer that I have vinylmaster pro on I get "Windows has stopped this device because it has reported problems. (Code 43)" and "A request for the USB device descriptor failed"

     

     Vinylmaster pro it's self works fine it's just that windows won't recognize the USB and shuts it down for some reason.

     

     Any help would be much appreciated