signman911

can't do anything with that , thanks anyway

Thanks Terry I can work with that

looking for a sign Warning this garage is own by a mean ol bastard , do any body have one

anybody have the Dodge Ram Truck Hockey stick (HEMI)

thanks do you have the long ones they go half way up the truck

my pcut 630 from uscutters in not cutting straight line like when you cut lettering ex ::: Fall the straight part on the f and ll when the blade goes left to right cuts dotted lines all the curve parts are perfect

can anybody id this font customer needs it exact

ID this font ----anybody

can't find the font can someone trace it

tired it could't find it

thanks but can't open it

picture to small to see can you spell the word CLARKE and post is a eps file

can some trace this please

Thanks you guys are great love that one rodh2

can this be traced or is it too small

I have tried several times to put my blade in the back hole so it would be inline with the cutting strip but the cuts are a problem with the blade in the back hole -when I cut lettering the round stuff like zeros and holes and the round part of the r is perfect but the straight cut side to side say on a i the top of the i is perfect but the sides of the i is dotted cuts same with the D seems when the blade goes side to side this happens works way better in the front hole but no cutting strip in the front hole becuse i think it was meant for a pen Any ideas

Where do you Check your offset .25

Anybody have calvin roasting marsmellows at a camp fire

Anybody got anythign close to this

nothing there biggreen

I am cutting with winpcsign mostly and sometimes use flexi 7.5 same thing don't have a serial connection only USB changed cables and also installed software to my laptop same problem tried different braun from 9600 to 19200 same problem usin com 3 if i just click cut the software is not responding I have to shut off cutter unplug usb from cutter i hear the sound on my computer where you unplug something thing I turn on the cutter and plug the USb in I hear the sound where the USb is detected and good to go

i have this one ChiselIniD.zip ChiselIniD.zip

i well work witrh that one thanks

Need a graphic for a Sign ' Castle Cleaning

Looking for a stripe to go on a 2009 Ford f150 to start at the bottom of the door and go on a angle half way back on the Box around 8 feet total length and around 6 inches wide . any ideas maybe 2 colors but 1 color well do