ARi
-
Content Count
20 -
Joined
-
Last visited
Posts posted by ARi
-
-
No place for offset on the machine itself
just a quick update
** seems like machine is faulty so has been sent back for repair/replacement
-
I adjust the cutter speed and pressure from the machine it self
And I am also changing the blade offset in sign cut in the cutter options
-
I have changed the blade offset and continuously done the test cut and it has not made the slightest difference from 0-5
I find this strange
-
5 hours ago, Wildgoose said:Study that info that was posted earlier (by me) and the stuff from Roland. You need to fine tune your blade offset. Rounded corners are a sign of too little offset.
Also I have followed the offset on the blade packaging, is this correct
-
I'm using a pixma vinyl cutter
could this be the problem
-
-
WOW!!!!
Just followed your instructions and the cut is completely different and a lot more accurate
I cannot believe how a simple thing makes the biggest difference
I cannot thank you all enough
Thank you sooooo much everyone
- 3
-
thanks for the reply guys
so even though it is cutting the test square fine it can still cause problems cutting ?
-
-
Thanks for your help wildgoose
But just like my previous attempts the image looks great on signcut and preview but cuts with funny edges and not clean and straight
I now do believe the cutter/setup is faulty
I am using a pixmax don't know if this is not a great cutter or setup is wrong
would appreciate any help
Once again many thanks to everyone and you wildgoose
-
I am using signcut
Wildgoose, the problem is it cuts some images perfect and others with slight defects
I have desgined this image so many times and it allways seems to have rounded edges when there clearly straight
It could be a set up issue as sometimes when I cut a regular circle, it doesnt cut full when it makes the full circle
But from my knowledge the set up is correct???
Thankyou for all the messages and I have attatched the file used
-
Managed to design the image but when I cut the design via sign cut the edges are not sharp and are rounded off
I have triple checked and also uses straight lines to joint the edges and they are straight on the design until they have been cut
is there something I'm doing wrong or is this a problem on sign cut ????
-
Was wondering how would you make/design a vector for a object
i.e. I have a car part that I want to make a vinyl cut to exact size
what would be the best way to do this
-
I'm using Inkscape
I cannot thank you enough for this, I will try a cut with it shortly and hopefully will be perfect, I'm so glad a found this forum, you have made me feel so welcome already. Thanks
I will be trying to replicate myself also as I do want to gain the skills, is it called bezier pen tool?
-
Wow that looks great
what software are you using
how long did that G take you to complete
and again thank you for helping
-
Just now, MZ SKEETER said:Did you use the site I just gave you? Enter the design in Whatthefont.com....I saw a font very close. and it was not Memphis.
will try that now
-
-
Thanks for reply
tried to find font with no luck
was told it is Memphis medium but that's slightly different
is there no way to copy the image clearly
-
Vector
in Vectorizing
Posted
I have been sent a replacement machine and it is still the same
I believe this machine is the problem and struggling with smaller images
looking for a new one
what machine do you have jburns and would you recommend it?