jonvince 3 Posted April 7, 2011 Hey everyone, I'm in the process of making a rather large sign for a client and not to sure what to charge. I've attached a picture to give you an idea of what I need to make. This is geteting applied to white lexan I believe. Dimensions are as follows. Any help would be appreciated. Thanks Dimensions: "Wicked Sharp" 72" X 16" "Ski & Sport" 60" X 4" "Telephone" 46" X 4" "Ski/Board/Skate/Golf" 69" X 2.5" Share this post Link to post Share on other sites
thebuttontaylor 1 Posted April 13, 2011 A couple of questions: 1. Are you installing it? 2. Who's providing the Lexan? 3. Is this a new sign or is there vinyl removal involved? 4. Are you using cast(outdoor) or calendered(indoor) vinyl? Bill Share this post Link to post Share on other sites
jonvince 3 Posted April 14, 2011 A couple of questions: 1. Are you installing it? 2. Who's providing the Lexan? 3. Is this a new sign or is there vinyl removal involved? 4. Are you using cast(outdoor) or calendered(indoor) vinyl? Bill I am not installing. When I go up to the store, it will already be there. The sign box is being built and delivered with all new materials. I already bought an oracal outdoor cast. Thanks -Jon Share this post Link to post Share on other sites
cd.edwards 1 Posted April 15, 2011 I would calculate the square footage's. Then I have a price per sq ft. In my case it's 4.50/sq. Weeding time is extra but in this case will not take long. Dont forget to charge for transfer tape. for me it would be 60.49 for vinyl/transfer tape. I would need to then figure out weeding time, machine setup and time to cut the decal. Share this post Link to post Share on other sites
Booper 2 Posted April 15, 2011 350 bucks RTA vinyl 500.00 installed on the Lexan. Share this post Link to post Share on other sites
jonvince 3 Posted April 26, 2011 I appreciate it. I guess my initial thought of about $150 total was a bit to low. Thanks Share this post Link to post Share on other sites