Search the Community

Hello all! Sorry to bother again but was unable to find the answers I was looking for when searching. I have glitter vinyl that I bought online. Same seller that my friend buys from and uses. The machine I have is a US Cutters Laserpoint 2 24" (i think). 45 degree blade at 112pressure and 400 speed (some intricate stuff in the designs). 1.So my first question is does anyone notice glitter vinyl being more difficult to weed than normal calendar vinyl or is it just me being new? 2. When weeding, some of the decals are easy to weed while others seem like the blade didnt cut all the way through. Is this caused by maybe too much pressure, causing friction heat on the blade holder and making the vinyl thin out instead of cutting correctly? 3. The clear transfer tape I have is Greenstar High tack but the issue I am running into is that it is not grabbing the vinyl, even the small stuff. Its about a 75% chance it wont grab at all and 25% chance that it will grab some of it. Is there a difference of types of clear high tack transfer tapes that I need to use? Sorry if this are nooby questions but I do happy to be new and am using stuff that I got with the machine (except for glitter vinyl, thats new.). I did search but did not find the answers I was looking for. As far as blade depth etc, I always ALWAYS cut a square piece of the vinyl that I am about to cut and adjust the blade depth as tutorials have suggested. The first few decals pull easily but as I get to the ones that were later cut in the process, it seems to get more and more difficult. Maybe just me? Thank you in advance!