mcrocker

In the original file neither of those things are happening. Not sure if it's just the switch to .svg or what. But the way it's messing up doesn't make sense. I just cut 2 mats that came out perfectly, then the next one, that was made from the same file as the other 2, messed up just slightly like just the thicker on 2 sides and nothing on other 2 sides, then I tried it again and it messed up even further. It can't be with the files cause it's messing up the same file in different ways.

ok 3stones.svg

It's a Sure Cuts A lot file, It can Export as .svg, .bmp, .jpg, .png, or .tiff

ok this is the file that I just cut a few minutes ago. It cut the 2 small ones perfectly, but the big one the frame is perfect on the sides but has shifted so there's double on the top and nothing on the bottom. https://www.sendspace.com/file/upbh7y It's like it's not even consistent with what's shifting. Sometimes it's top/bottom sometimes it's left/bottom etc. And the other day it did one that was off by a good 3".

I can't make any sense of Signblazer I just keep getting errors and the program is kind of a mess, I don't know how to use it.

I'm still having trouble with this. Sign Blazer just gives me an error when I try to open/import ANY file type. I've also tried contacting the company and they just seem to have no clue and tell me things that have nothing to do with the problem I'm having. I'm attaching a photo here of a mat that I cut. And you guys will be able to see what I'm talking about with the frame being off while everything else is fine. See the frame is double the thickness it should be on 2 sides and just one line on the other 2 sides, but all the text is perfectly fine like it should be. Thanks anybody that has a look!

Thanks I'll give it a try

I'm using Sure Cuts A Lot, only program I have for it.

I'm cutting something that has a frame on it and the cutter is doing the text inside perfectly but it keeps cutting the frame wrong. Instead of having an inside line and outside line, it is cutting as if it shifts after cutting the inside line and then the outside frame is off. It ends up lining up the outside and inside frame at the same point and so it ends with one line around 2 sides of the frame and the other 2 sides have double the thickness they are suppose to have. And it's not the same each time. I did 2 in a row that turned out with one having the top and bottom side and one side with 1 line, other side with double thickness. The next one had 1 line going around the bottom and left side while the top and right have double thickness. Anyone know something I could do to fix this? We already had to get rid of one machine from another company because of alignment that went off and couldn't be fixed, I really hope it's not happening now with this one. Thanks

I don't think it's a SCAL problem, I think it's something I'm doing while setting the home origin on the cutter. ON the video tutorial, it shows the numbers changing for X and Y on the screen when you set the home origin but mine both stay at 0

I'm using Sure Cuts A Lot

Hi can anyone help with this? I'm trying to set the home origin like thye say in the tutorial video, I set it when it was right over on the left side, if I press reset then it moves back and forth and stays right where I put it. But when it starts cutting it shifts to almost a foot in from the side and that's where it starts cutting. I'm doing blast mask and I have the pieces cut say 15 x 15 for the 12 x 12 rock it will be blasted on, so when it shifts like this it doesn't have enough room to do the side of the stencil. Anyone have any suggestions? It's for a Titan 2 by the way, forgot to put that in there Thanks

I've been trying for a half hour to get the live chat thing to work but never anyone there, can someone tell me if the Titan 2 is compatible with 42 mil sandblast mask? And does it come with one of the softwares here or is it compatible with Win PC? I already have a machine that has turned out to be crap, and have a lot of rolls of 42 mil sandblast mask left. Thanks for any help