xoxoVendetta

see if the blade holder wiggles around at all. if it does then ya thats the problem =)

i fixed it!! i took off the carrier box and a few of the nuts inside it were loose. so i tightened em and now it cuts perfectly

I have. still messes up.

i dont know if this helps any... but every test star i cut looks exactly the same. like its cutting perfectly wrong. if that makes sense.

yea i tried alot of different speeds. even super slow it does that same weird cut. im gonna message them or call them Monday. i just wanted to see if anyone on here could help me so i didnt have to wait =/ thanks for tryin! ive been lookin for answers on here all day and still havent figured it out.

no im not.

the grit rollers seem fine and i didnt find any cracks in the carriage. and i can only change the offset from the SCAL program... so that shouldnt interfere with the test cut should it?

oh sorry, its the MH 871 -mk2 yes i checked the rollers and they are on track. set screws on the grit rollers? where would that be. sorry im new to this

the 'test' cuts are horrible and its making everything i cut look horrible. ive been reading things on this forum for hours and have tried A LOT of the things ive seen and its still doing the same thing =/ in the picture : the red star is how it use to cut like a day ago.. perfect lines and the black is how its cutting now. every test i do looks like this. ive changed the speed and all that stuff.. different vinyl, different blade, everything. im stuck =/