rock jeep

This is GREAT! I have been on the forum a few times with questions for logos and for my cutter in general, and everyone has always been so helpful. My collection of files was small because we don't actually do a whole lot of logos at our shop. But recently, we've had several requests, and naturally I came here first. I never noticed this thread before. It's wonderful! Thanks to all who have shared. Maybe soon we'll have something to share, too! Thanks again! Dani

I have searched the internet high and low for free dancer silhouettes, but can't find any downloads in .eps files. Does anyone have any they can send my way? It's for a dance team at a high school. Thanks!

mr300s...I finally got it to work!!!! Yay!!! Thank you so much for the help!

Thank you for trying again. Maybe my computer is just acting up. This is the single hardest image I have ever tried to find and download in a .eps file. The pic you sent of all the dancers IS what she's looking for, just can't seem to get a grasp on it! lol I did find 2 others to work, but they were more cartoonish and she didn't really care for them. I just wanna make the customer happy. Thanks again for trying.

Thanks for the link. I tried, but can't get it to download in .eps...even the ones that say its .eps....oh, well. I'll figure something out. Thanks again.

It doesn't have to be free, just that I'm trying something new. Don't want to purchase without knowing if this cheap machine will cut something like that.

Hello. I have SignBlazer and I need to know if anyone can tell me how to remove the "box" from a logo. I have this pic of the outline of a razorback, but it's in a "box" that happens to be significantly bigger, therefore I am having trouble measuring it properly. It wants to measure the top of the box to the bottom of it, instead of the top to bottom of the razorback. I have removed them before, but it's been a while and I forgot how to do it. Can anyone help??? Thanks!

I only need half of a symbol that I am cutting, but I don't know what to select to get it to cut only half. Does anyone know how to do that? Thanks in advance for any help you can give me!

We have had this cutter for a year. It has never done this before. As a matter of fact, it cut one small sign this morning already with no problem. It is just stopping, right in the middle of a cut, as if it were done. Nothing fancy, just a phone number for a store front. We have done the same type of cut many times. Anyone know what could be causing this, when it worked fine just a few minutes prior? Thanks.

Help! Our Signblazer has decided today that it won't cut anymore. The message that pops up reads: "Cannot open the output device. Error initializing cutter." We have not done anything out of the norm, so we don't know how it happened. We checked to make sure the device had not come unplugged, but it all looks good to go. Anyone know what to do? Also, just recently, when we go to sign in to Signblazer and click trial mode like we always have, it gives a timer that never used to be there. When it first started doing this, it was about a 3-5 second wait before it would open, now it's up to 43 seconds before it will open up! We also have no idea how this occurred. If anyone can help explain our 2 problems, please do so! Thanks!

Ok, we got it! Thanks again! But if anyone can still figure out my problem with signing in to Signblazer, please let me know! Thanks!

Yeah, it had to have done it on it's own, but we will look into that. Thanks to both of you...

I downloaded a Sooner Trailer Logo, but my machine doesn't seem to like it.... I can't seem to find another. I guess I'm not looking in the right place. Do any of you have this or can you find me one? Thanks!

Here you go.

wow and I thought the 85 conv. would be the hard one to find. I myself would like to have one of the 67 if anybody has them.

Thanks, I grabbed one too

We had a request for a pole dancer silhouette. Does anyone have some they can share? I have searched online, but have been unsuccessful in downloading them to my program. Thanks!

I just tried pulling the vinyl out some and lining it up with the measurements on the machine and it still tracks over about 1.5" I think I will try to back off the springs on the right a lil cause it looks like that side is pinching the vinyl a lil more than the left. Do yall think that will have an effect?

I am having the same problem with mine. In about 3' it will track over about 1.5"-2". I line the vinyl up with the measurements on the front and the back but it still tracks over. I have tried setting the rolls on the rollers and running one of the rollers through the roll of vinyl. But nothing seems to help. I havent tried what the other guy said. Do you just pull about 2' off the roll so it isnt trying to pull the roll too or pull it through the machine with the rollers tight? It will also cut long phrases or words in a slight arch and even more rare it will let one letter drop What could be causing that? The arch isnt that noticeable and I dont think it does it all the time but it bothers me when it does.

I am looking for an ancient assyrian font. I can't seem to locate the one I need. The customer was very specific, however the onlt 2 I found and downloaded don't have the EXACT symbols I need. In this photo: http://themesopotamian.org/cgi-bin/forum/main.pl?noframes%3Bread=24211, on line 5 is the font I need. I emailed the guy days ago and never got a response. Anybody else have a font like that? The 2 I downloaded are like lines 6 & 4, and as you may see, have a few differences.... Thanks....

Thanks guys I will try that stuff tonight.

How can I keep this lil guy in full detail so I can cut the different colors separately. I know there is a way I just cant figure it out. I can select them and ungroup. But how can I just select the peanut or the hat and legs and such. If I could keep it in color I could just select which color I wanted cut when I go to the cutter right? http://www.brandsoftheworld.com/search/115430737/205971.html

Ok, amazingly in one day I have another request I cannot find online..... It is the silhouette/outline of an Asyrian Winged Bull..... Anybody? LOL Thanks!

That's it, Mark-S! Thanks!!!

How do I change the color? I still havent figured that part out.