RichB
Members-
Content Count
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by RichB
-
This is probably a newbie thing, but I thought I'd ask before I go nuts. I have a small design that a cut a ton of. The first cut is always perfect. The rest have a 1/4" overcut at the top which leaves a sliver with a 1/32" offset. It wouldn't be a big deal if I were only doing a couple as I'd fix it with a razor knife and move on, but I need to cut 50 at a time. Any thoughts on how to fix this?
-
I worked with the calibration and reset the overcut. I believe that this is more of an issue with the image than the cutter. None of my other images have this problem.
-
Checked it and it was a bit off so I recalibrated. Still not right, but the sizes are correct now. Thanks!
-
The machine cuts fine, but what I'm finding is that that beginning and end of the cut don't meet. they over shoot leaving a sliver of material that needs to be cut manually.
-
As far as I can tell everything is set in vinylmaster.
-
I've been messing with this all weekend. If I take the blade offset to zero it cuts the part of the decal I've been having trouble with perfectly, but doesn't cut other portions of the image completely. I still can't figure out what the first cut is perfect and the rest have an issue.
-
Vinylmaster