Spam on Maui

SP-540i giving 0110 and 0040 codes. Worth fixing?

Recommended Posts

Our Roland SP-540i has given 0110 and 0040 error codes. From what I can find:

  • 0110 relates to the linear encoder system not reading correctly. Could be a dirty or damaged encoder strip or the servo or scan motor.
  • 0040 is for the carriage in the scan direction because the motor is overloaded or stalled.

I've got some stuff to try but the boss is asking if it's even worth it at this point. The SP-540i pretty old, we just replaced a belt as a major project, and it could be well over our heads. Likewise, the concern is too that there is no Roland tech here on-island to consult plus this might be the start of throwing good money after bad.

Is this worth trying to fix ourselves? Or is it time for a new printer? He says we got it in 2011.

Share this post


Link to post
Share on other sites

I think it's going to come down to how much the parts are going to cost, and if someone is willing to attempt to wrench on it, versus the cost of replacing the machine with something comparable.  If the parts are reasonably priced, someone is willing to try to do the repair, then it might be worth a try.

  • Like 1

Share this post


Link to post
Share on other sites

@Spam on Maui Hey - Hopefully you can source parts for the Roland and see what the cost with shipping would be on that.  If not, One Shot Supplies in Waipahu might be a Roland distributor - just know that nothing from them is cheap, but it good place when you're in a bind.  Poke would be nice tonight,  If you like ginger, Foodland has a really good seared ahi tataki poke, though my preference is still salmon pokes, or any non-spicy poke with inamona and limu :D

Share this post


Link to post
Share on other sites

We've gotten stuff from OneShot. I don't think their prices are bad considering Hawai'i cost of living and doing business (relatively speaking). I'm checking with US Cutter too. Parts are less a concern than the skilled labor to put them in without screwing things up worse or chasing the wrong issue.

Share this post


Link to post
Share on other sites
 

I think it's going to come down to how much the parts are going to cost, and if someone is willing to attempt to wrench on it, versus the cost of replacing the machine with something comparable.  If the parts are reasonably priced, someone is willing to try to do the repair, then it might be worth a try.

Agreed. If the encoder strip is scratched or cleaning fails, replacing just the encoder raster strip and sensor is cheap and easily DIY-able before replacing the scan motor.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now