Pcrat 65 Posted January 16, 2022 OK so i have an epson 2760 ecotank. It prints great, when i print normally or from photo shop, but when i use Cricut print then cut, it goes to print it, it smears it. Im using Glossy sticker paper, ive tried 2 different brands of glossy and also tried a matte sticker paper. it smears on all them. IF i use photoshop to print, it prints perfect! Ive even changed settings to normal printer paper etc. any ideas? WHen i use print dialog box, it brings up the generic print dialog with minimal settings. Share this post Link to post Share on other sites
MZ SKEETER 4,708 Posted January 16, 2022 There is only a handful of people who answer questions here, and not one of them use a Cricut cutter or printer. Check out the crafting forums, Cricut forum etc if you are wanting an answer or you will be waiting a long time. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted January 16, 2022 17 hours ago, Pcrat said: OK so i have an epson 2760 ecotank. It prints great, when i print normally or from photo shop, but when i use Cricut print then cut, it goes to print it, it smears it. Im using Glossy sticker paper, ive tried 2 different brands of glossy and also tried a matte sticker paper. it smears on all them. IF i use photoshop to print, it prints perfect! Ive even changed settings to normal printer paper etc. any ideas? WHen i use print dialog box, it brings up the generic print dialog with minimal settings. make sure you are using a vinyl made for aqueous ink - water based inks require a special layer to be added over the vinyl or the ink will not dry - causing smearing Share this post Link to post Share on other sites