TimpanogosSlim 2 Posted November 3, 2021 My cutter appears to be one of the numerous re-branded versions of the ct630. It's currently running v2.01 firmware and generally seems to work ok but i am a n00b at using vinyl cutters. I have my own eprom burner - so while it's not worth it to me to pay for a programmed chip with unknown improvements, I'm curious enough that if i can get an image of the firmware i think it would be neat to see what the difference may be. 1 Share this post Link to post Share on other sites
slice&dice 2,450 Posted November 4, 2021 Uh-Oh, this guy again! eprom burners, image of firmware, programmed chips ----- WTF. I'm backing away, fast, this stuff is too involved and technical. All this nonsense over a $60 cutter. Really. What is in the water there in Utah? 1 Share this post Link to post Share on other sites
baermuda 0 Posted January 16 Hi there, I also like to know if someone could provide a firmware image for this plotter or better my CT900 (I think it is compatible with my CT900), because the IC on my mainboard is missing a leg and I like to create a new one. Any version is helpful to me. Thank you very much in advance. Stefan Share this post Link to post Share on other sites