Wildgoose 4,200 Posted April 29, 2021 On 4/26/2021 at 8:10 AM, curlyp said: Interesting point about a measuring tape. Thanks for the tip! I just took pics with the measuring tape with it. Is this what you mean? I put the grid marks on my camera and lined them up to the straight edge of the laptop. Did I get it correct? My apologies, I left out the key information! I use VinylMaster XPT (expert edition). My MacBook Pro is a 2017 non-touch bar. After looking at my laptop, I want to make a template for the mouse pad, left and right of keyboard, top piece of the keyboard, and the top of the laptop (opposite side of screen ). I cannot do the left and right of the keyboard because the speakers are there. Yes, allot of these are $25-$30 on Etsy! Yes but if you look at the shot. The computer is not "Square" due to the angle of the shot. If you trace than it will not be accurate. You can also attempt to scan the thing if you have a large enough scanner. That will be more accurate in my experience but may not fit your MacBook. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted April 29, 2021 this is what goose is saying - I put a square mask around your computer and cut it so you can visualize the distortion created by the angle and the picture not being straight down 1 Share this post Link to post Share on other sites
Wildgoose 4,200 Posted May 4, 2021 On 4/29/2021 at 10:53 AM, Dakotagrafx said: this is what goose is saying - I put a square mask around your computer and cut it so you can visualize the distortion created by the angle and the picture not being straight down That's it exactly. Thanks Dakota. 1 Share this post Link to post Share on other sites
