jRose 0 Posted January 9, 2018 The company I work with just purchased a Titan 3 cutter and we hope to use it to make graphics for our custom awnings that we manufacture. I am wondering what type of mask material would work to make a mask that will be hand painted on a Sunbrella canvas Share this post Link to post Share on other sites
rlvied 292 Posted January 10, 2018 very makes 2 different paint mask that can be used. One is just normal the other is a high temp; mask for high temp as is baking the paint. the paint mask is easy to remove Share this post Link to post Share on other sites
darcshadow 1,626 Posted January 10, 2018 I believe that should be Avery, guessing auto correct dropped the A. ha 1 Share this post Link to post Share on other sites
tooler82 182 Posted January 10, 2018 I don't know how good it is, but I ordered some RTape Prograde Paint Mask that's yellow. Don't know what temp it goes up to, only says it can withstand short term bake cycles at +200 degrees Fahrenheit Share this post Link to post Share on other sites
jRose 0 Posted January 10, 2018 13 hours ago, rlvied said: very makes 2 different paint mask that can be used. One is just normal the other is a high temp; mask for high temp as is baking the paint. the paint mask is easy to remove Thank you! I am going to give this Avery mask a try. Is there a certain transfer tape that works better with pant masks? Share this post Link to post Share on other sites
tooler82 182 Posted January 10, 2018 I would assume it wouldn't be any different. I've always used the RTape 4075RLA. It's excellent transfer tape. Share this post Link to post Share on other sites