rxninja 0 Posted June 2, 2013 I've had my SC for about a year and I've never had this issue, so I'm perplexed as to why and how it has suddenly shown up and started happening. When I'm cutting a design, the first point in my design that touches the bottom edge causes a single back-and-forth cut from that point to the origin and back. If I'm cutting X number of copies, this only happens on the first copy. I've tried to attach a picture of this happening, but it's a little hard to see. If you look closely, you can see the first copy and then the first part of the second copy (it's the Terran logo from Starcraft) and the first copy has this weird underline-like thing going on. That's the extra cut I'm talking about. I truly have no idea why this is happening. I have weeding frames turned off, I don't have any crazy lead-in or overcut settings on, and I actually didn't change any SignCut settings between it not happening and when it started. As far as I can tell, there's nothing new/different about my vectors either. Any insight? Share this post Link to post Share on other sites