Player2D 0 Posted March 2, 2013 I just received a Copam 2500 as a replacement for a Laser Point II. After taking it out of the box after turning it on it will just go to the right and does not stop. As soon as the carriage hits the side wall it continues to try and move right while making a squealing sound. It does not stop and the longer the power is on the louder the squeal seems to be. Any help would be amazing. Thank you! Share this post Link to post Share on other sites
KINGRUPERT 7 Posted March 4, 2013 just had the same problem with a sc cutter there is a swith on the bcak of the machine on both ends and a metal tab on the cutter head that hits the switch to tell it that its at the end, the tab maybe bent just look at the back of your cutter Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted March 4, 2013 Call tech support - as I recall the copam uses magnets in the rollers to detect the vinyl size - something is very wrong Share this post Link to post Share on other sites