illustrationsp 0 Posted January 24, 2013 i just buy a sp-300 printer cutter and i did not get a cd or driver whit-it i got it from a secondhand seller it whose a nice deal so i goth it but now i fond that there is no driver i contact the seller but he don't want to help me the printer did a« nice print test so i don't think there is a problem whit it but now i need i driver so the question is... do i have to by a driver? is ether free compatible driver? plz help me out Share this post Link to post Share on other sites
mark-s 1,126 Posted January 24, 2013 Go to Rolands site and download the drivers and software. Free mark-s Share this post Link to post Share on other sites
illustrationsp 0 Posted January 24, 2013 i try there is no link to the rip only the update Share this post Link to post Share on other sites
mb20music 760 Posted January 24, 2013 They show drivers for Windows XP and Windows 2000 available for download. I heard you can use Corel and Flexi, there are probably some other programs that will work as well. http://support.rolanddga.com/_layouts/rolandreports/_productsupportsearch.aspx?pf=Wide+Format+VersaCAMM+Inkjets&pm=SP-300V/540V Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted January 24, 2013 if it is a sp-300 you will have to buy a rip software for it - if it is a sp-300v or sp-300i then you can get versaworks for it. rememer it is not like printing from your desktop printer you need a RIP program Share this post Link to post Share on other sites