top53

Things I've learned from this forum

Recommended Posts

I have three videos thanks mb20music who turned me on to Jing with plans to make others. It is a way for me to pay forward for all the help I have received on this forum. No certain order but special thanks to Skeeter, Rodger,Jay2703,Mr300s,Racer88,2ctmediallc, mb20music and many others. I have only been doing this since Dec 2011 and without the help I have received there is no way I could have figured it out. So if you have a problem there are many talented people on here that are willing to help you learn.

Thanks everyone.

That being said here is a few recommendations

1. Read your plotter manual thoroughly

2. Read your design cutting software manual thoroughly

3. Search this forum with keywords

4. If this fails post your problem in the right category, some one will help you.

Here is my videos up till now.

Fill with SignBlazer: http://screencast.com/t/cOdG5YHZLd

Fill in Inkscape: http://screencast.com/t/XQbLzoMm

Trace in Inkscape: http://screencast.com/t/AXBvFaI2t

Another example:

Part one: http://screencast.com/t/PBKyw6HkL7d

Part two: http://screencast.com/t/5RNW2eRbqva

  • Like 4

Share this post


Link to post
Share on other sites

Thanks for the videos and true that! I went over to the "other" forum a while back because this one was full of rude people always on the ready to make disparaging remarks to members and in constant fear that somebody might steal their "art".

Turns out (thankfully) they seem to have gone over there and polluted that forum to the point that they're even moderators now.

Glad to see that people here are still sharing and helping each other out in the true spirit of a forum.

  • Like 2

Share this post


Link to post
Share on other sites

Thanks top53 for taking the time to make the videos. Wasn't for those instructional clips, I wouldn't have never thought of using InkScape. I really like it from just the short time using it. ;D

  • Like 1

Share this post


Link to post
Share on other sites

Yeah, the one thing I've read and learned is to SEARCH THE FORUM! This forum would have 1/2 the posts if people just searched. The guys on here are good at what they do and they don't mind sharing. I appreciate it guys.

  • Like 1

Share this post


Link to post
Share on other sites

DOES ANYONE HAVE ANY HELP ON USING THE COREL DRAW 12 SOFTWARE :huh:  ANY HELP IS WELL APPRECIATED ... THANKS FROM SOUTH CAROLINA..

Share this post


Link to post
Share on other sites

Thanks for the mention and thanks for the contribution . You are a nice fit here :thumbsup:

Share this post


Link to post
Share on other sites

Ive pretty much learned evrything I know about cutting vinyl here.

Share this post


Link to post
Share on other sites
Ive pretty much learned evrything I know about cutting vinyl here.

+1. Um. Everything! Thanks to everyone on here.

This really is a great forum with great people that do not mind sharing what they know.

One day I may be able to help with some input myself.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now