top53 53 Posted May 8, 2012 I have three videos thanks mb20music who turned me on to Jing with plans to make others. It is a way for me to pay forward for all the help I have received on this forum. No certain order but special thanks to Skeeter, Rodger,Jay2703,Mr300s,Racer88,2ctmediallc, mb20music and many others. I have only been doing this since Dec 2011 and without the help I have received there is no way I could have figured it out. So if you have a problem there are many talented people on here that are willing to help you learn. Thanks everyone. That being said here is a few recommendations 1. Read your plotter manual thoroughly 2. Read your design cutting software manual thoroughly 3. Search this forum with keywords 4. If this fails post your problem in the right category, some one will help you. Here is my videos up till now. Fill with SignBlazer: http://screencast.com/t/cOdG5YHZLd Fill in Inkscape: http://screencast.com/t/XQbLzoMm Trace in Inkscape: http://screencast.com/t/AXBvFaI2t Another example: Part one: http://screencast.com/t/PBKyw6HkL7d Part two: http://screencast.com/t/5RNW2eRbqva 4 Share this post Link to post Share on other sites
locknload1 17 Posted May 8, 2012 Thanks for the videos and true that! I went over to the "other" forum a while back because this one was full of rude people always on the ready to make disparaging remarks to members and in constant fear that somebody might steal their "art". Turns out (thankfully) they seem to have gone over there and polluted that forum to the point that they're even moderators now. Glad to see that people here are still sharing and helping each other out in the true spirit of a forum. 2 Share this post Link to post Share on other sites
YFZBOB 8 Posted May 8, 2012 Thanks top53 for taking the time to make the videos. Wasn't for those instructional clips, I wouldn't have never thought of using InkScape. I really like it from just the short time using it. 1 Share this post Link to post Share on other sites
VinylDave 11 Posted June 2, 2012 Yeah, the one thing I've read and learned is to SEARCH THE FORUM! This forum would have 1/2 the posts if people just searched. The guys on here are good at what they do and they don't mind sharing. I appreciate it guys. 1 Share this post Link to post Share on other sites
JJennings 4 Posted July 22, 2013 DOES ANYONE HAVE ANY HELP ON USING THE COREL DRAW 12 SOFTWARE ANY HELP IS WELL APPRECIATED ... THANKS FROM SOUTH CAROLINA.. Share this post Link to post Share on other sites
jaybyrd 3,770 Posted July 22, 2013 Tons of tutorials on the web. Here's a link to corel website with tutorials and tips and tricks. http://www.corel.com/corel/pages/index.jsp?pgid=13300215 Share this post Link to post Share on other sites
Rodger 527 Posted July 22, 2013 Thanks for the mention and thanks for the contribution . You are a nice fit here Share this post Link to post Share on other sites
WHIT72 36 Posted August 1, 2013 Ive pretty much learned evrything I know about cutting vinyl here. Share this post Link to post Share on other sites
DeepEllumGlass 7 Posted December 31, 2013 Ive pretty much learned evrything I know about cutting vinyl here. +1. Um. Everything! Thanks to everyone on here. This really is a great forum with great people that do not mind sharing what they know. One day I may be able to help with some input myself. Share this post Link to post Share on other sites